Study of Ultra-fine WC Powder Preparation by Mechanical Ball Milling AITranslate
Abstract AITranslate
Study is made of the vibrating ball miling for ultra-fine WC powder preparation.Coarse,medium and fine WC powders are used for tests at different ball percentage and milling time.The results showed that longer ball milling time cam result in ultra-fine WC powder with FSSS particale size<0.5 μm,while larger ball percentage and longer milling tine can make the particle size smaller yet without any influence on the particle size distribution.The milled powder size distribution is related to that of the primary powder.The longer milling time will result in smaller grain size and larger stress.
KeyWords AITranslate
1毛昌辉.高能机械研磨纳米结构WC-Co复合粉末的研究[J].稀有金属,1999,23(3):185-188. 被引量：22
2Leiderman M 等.亚微晶粒硬质合金的烧结、显微结构和性能[A]..第15届普兰西会议译文集[C].株洲:株洲硬质合金厂,1999.178.
1潘顺龙,张敬杰,宋广智.非氧化物陶瓷超细粉的制备[J].感光科学与光化学,2005,23(4):289-299. 被引量：1
2LEI Yiwen,SUN Jing,DU Xiwen,ZHAI Qi,HU Shengliang.Properties and microstructure of VC/Cr_3C_2-doped WC/Co cemented carbides[J].稀有金属：英文版,2007,26(6):584-590. 被引量：7
3LEI Yiwen,WU Enxi.Sintering characteristics and microstructure of WC-Co-VC/Cr_3C_2 ultrafine cemented carbides[J].稀有金属：英文版,2009,28(5):482-486. 被引量：3
4雷贻文,吴恩熙.VC/Cr_3C_2添加剂与烧结温度对超细WC-12Co硬质合金的影响[J].材料科学与工艺,2010,18(3):405-409. 被引量：7
5吴翔,廖军,刘方舟.不同工艺条件对WC-20%Co硬质合金性能的影响[J].湖南有色金属,2013,29(1):44-46. 被引量：1
6唐玉霜.离子色谱柱切换法测定工业硫酸锰中的氯离子[J].湖南有色金属,2013,29(1):76-78. 被引量：1
7张华民,蒋福海.硬质合金研磨体形状和规格对中颗粒碳化钨粉末研磨效果的影响[J].稀有金属与硬质合金,2020,48(2):90-95. 被引量：1
1刘柏雄,杨高玲,邝梦杰,尚宜生,朱根松,杨斌.氧化钇掺杂对制备纳米WC-Co复合粉的影响规律及其调控机制[J].稀有金属,2020,0(1):26-33. 被引量：4
2LEI Yiwen,WU Enxi.Sintering characteristics and microstructure of WC-Co-VC/Cr_3C_2 ultrafine cemented carbides[J].稀有金属：英文版,2009,28(5):482-486. 被引量：3
3贾宝瑞,秦明礼,李慧,曲选辉.碳化硼粉末制备方法的研究进展[J].材料导报,2010,24(9):32-34. 被引量：20
4姜中涛,李力,陈慧,刘兵,陈巧旺.一步还原法制备超细碳化钒铬粉末[J].粉末冶金材料科学与工程,2013,18(4):522-526. 被引量：2
5江荆,伍斯静,周花珑,覃建友.电感耦合等离子体原子发射光谱法测定硫酸锰中钙镁[J].冶金分析,2014,34(1):71-74. 被引量：5
6屈广林,颜练武,张卫兵,何惧.碳化钨和碳化钒在固相钴中的固溶研究[J].硬质合金,2014,31(1):8-14. 被引量：6
7张豪,叶金文,刘颖,马世卿.开放体系下碳热还原氮化法制备(Cr,Ta)_2CN固溶体粉末的研究[J].功能材料,2015,46(B06):71-74.
8柯德庆,潘应君,张恒,陆旭峰,洪波,徐源源.Cr_3C_2对WCoB-TiC金属陶瓷组织和性能的影响[J].材料导报,2015,29(18):80-83. 被引量：2
9罗旭东,谢志鹏,张国栋,田丰硕,陈莉莉.氧化钛对方镁石-尖晶石制品烧结及热膨胀性能的影响[J].材料科学与工艺,2014,22(5):36-41. 被引量：1
10颜新宇,王守仁,温道胜,王高琦,刘文涛.HfC颗粒对WC/Co复合材料裂纹萌生和扩展行为的影响[J].西北工业大学学报,2019,37(3):628-635. 被引量：6
1邱翠榕,黄璞,冯大军,郑锋.振动球磨制备Fe-6.5%Si硅钢微粉[J].武钢技术,2006,44(5):22-25.
2刘维平,黄庆梅.纳米晶铁的制备及其性能[J].南方冶金学院学报,1996,17(4):242-246. 被引量：5
3尹邦跃,王零森,边立刚,方寅初.B_4C粉末的滚动球磨、振动球磨和气流粉碎[J].粉末冶金技术,2001,19(6):361-364. 被引量：8
4娄本浊.机械球磨法制备纳米WO_3粉及球磨参数影响[J].热加工工艺,2008,37(20):33-35. 被引量：1
5尹邦跃,王零森.气流粉碎B_4C粉末的掺碳活化烧结研究[J].无机材料学报,2003,18(3):633-637. 被引量：4
6肖国华,郑峰,石倩.机械球磨法合成Fe-18Cr-9W纳米合金粉末[J].西南科技大学学报,2005,20(4):7-12. 被引量：6
7刘涛,陈洪,柴春林,徐祖雄,马如璋.机械球磨法制备纳米晶Fe_（73．5）Cu_1Nb_3Si_（13．5）B_9的[J].功能材料与器件学报,1996,2(2):123-127. 被引量：1
8彭元东,易建宏,李云卿,李丽娅,罗述东,唐新文.粉末特性对烧结Sm_2(Co、Fe、Cu、Zr)_(17)合金磁性能的影响[J].粉末冶金工业,2001,11(5):13-18. 被引量：7
9娄本浊.球磨法制备纳米WO_3粉及球磨参数影响分析[J].陶瓷,2008(7):34-36.
10王焕平.Synthesis and Dielectric Properties of Submicron CaTiO_3 Powders by Mechanical Ball-milling Method[J].武汉理工大学学报：材料科学英文版,2007,22(B12):837-840.
Basic Information:
DOI：
Chinese Library Classification Number:TF123.72[冶金工程—粉末冶金]
Citation Information:
Study is made of the vibrating ball miling for ultra-fine WC powder preparation.Coarse,medium and fine WC powders are used for tests at different ball percentage and milling time.The results showed that longer ball milling time cam result in ultra-fine WC powder with FSSS particale size<0.5 μm,while larger ball percentage and longer milling tine can make the particle size smaller yet without any influence on the particle size distribution.The milled powder size distribution is related to that of the primary powder.The longer milling time will result in smaller grain size and larger stress.
quote
| GB/T 7714-2015 | [1] WU En-xi, LEI Yi-wen, QIAN Chong-liang, et al. Study of Ultra-fine WC Powder Preparation by Mechanical Ball Milling[J]. Rare Metals and Cemented Carbides, 2003(1): 11-14. |
| MLA | [1] WU En-xi, et al., "Study of Ultra-fine WC Powder Preparation by Mechanical Ball Milling." Rare Metals and Cemented Carbides, no. 1, 2003, pp. 11-14. |
| APA | [1] WU En-xi, LEI Yi-wen, QIAN Chong-liang, LI Jian, & CENG Qing. (2003). Study of Ultra-fine WC Powder Preparation by Mechanical Ball Milling. Rare Metals and Cemented Carbides(1), 11-14. |
| IEEE | [1] WU En-xi, LEI Yi-wen, QIAN Chong-liang, LI Jian, and CENG Qing, "Study of Ultra-fine WC Powder Preparation by Mechanical Ball Milling," Rare Metals and Cemented Carbides, no. 1, pp. 11-14, 2003. keywords: {vibrating ball milling;ultra-fine WC powder;particle size distribution} |