daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Polymer, Additives, and Processing Effects on N95 Filter Performance AITranslate

Oak Ridge National Laboratory;Oak Ridge National Laboratory;Oak Ridge National Laboratory;Oak Ridge National Laboratory;Oak Ridge National Laboratory;Oak Ridge National Laboratory;Oak Ridge National Laboratory;RJ Lee Group;RJ Lee Group;RJ Lee Group;Oak Ridge National Laboratory;Oak Ridge National Laboratory;Oak Ridge National Laboratory;Oak Ridge National Laboratory;Oak Ridge National Laboratory;Oak Ridge National Laboratory;Oak Ridge National Laboratory;Oak Ridge National Laboratory;Oak Ridge National Laboratory
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

The current severe acute respiratory syndrome coronavirus 2 (SARS-COV-2) pandemic has highlighted the need for personal protective equipment, specifically filtering facepiece respirators like N95 masks. While it is common knowledge that polypropylene (PP) is the industry standard material for filtration media, trial and error is often required to identify suitable commercial precursors for filtration media production. This work aims to identify differences between several commercial grades of PP and demonstrate the development of N95 filtration media with the intent that the industry partners can pivot and help address N95 shortages. Three commercial grades of high melt flow index PP were melt blown at Oak Ridge National Laboratory and broadly characterized by several methods including differential scanning calorimetry (DSC), X-ray diffraction (XRD), and neutron scattering. Despite the apparent similarities (high melt flow and isotacticity) between PP feedstocks, the application of corona charging and charge enhancing additives improve each material to widely varying degrees. From the analysis performed here, the most differentiating factor appears to be related to crystallization of the polymer and the resulting electret formation. Materials with higher crystallization onset temperatures, slower crystallization rates, and larger number of crystallites form a stronger electret and are more effective at filtration.

KeyWords AITranslate

isotactic polypropylene melt blowing N95 filtration crystallization electret
No data

Basic Information:

DOI:https://doi.org/10.1021/acsapm.0c01294

Chinese Library Classification Number:

Citation Information:

The current severe acute respiratory syndrome coronavirus 2 (SARS-COV-2) pandemic has highlighted the need for personal protective equipment, specifically filtering facepiece respirators like N95 masks. While it is common knowledge that polypropylene (PP) is the industry standard material for filtration media, trial and error is often required to identify suitable commercial precursors for filtration media production. This work aims to identify differences between several commercial grades of PP and demonstrate the development of N95 filtration media with the intent that the industry partners can pivot and help address N95 shortages. Three commercial grades of high melt flow index PP were melt blown at Oak Ridge National Laboratory and broadly characterized by several methods including differential scanning calorimetry (DSC), X-ray diffraction (XRD), and neutron scattering. Despite the apparent similarities (high melt flow and isotacticity) between PP feedstocks, the application of corona charging and charge enhancing additives improve each material to widely varying degrees. From the analysis performed here, the most differentiating factor appears to be related to crystallization of the polymer and the resulting electret formation. Materials with higher crystallization onset temperatures, slower crystallization rates, and larger number of crystallites form a stronger electret and are more effective at filtration.

quote

GB/T 7714-2015 [1] Gregory S. Larsen, Yongqiang Cheng, Luke L. Daemen, et al. ACS Applied Polymer Materials, 2021(3). DOI:10.1021/acsapm.0c01294.
MLA [1] Gregory S. Larsen, et al., ACS Applied Polymer Materials, no. 3, 2021, https://doi.org/10.1021/acsapm.0c01294.
APA [1] Gregory S. Larsen, Yongqiang Cheng, Luke L. Daemen, Tej N. Lamichhane, Dale K. Hensley, Kunlun Hong, Harry M. Meyer, III, Steven J. Monaco, Alan M. Levine, Richard J. Lee, Emma Betters, Kim Sitzlar, Jesse Heineman, Justin West, Peter Lloyd, Vlastimil Kunc, Lonnie Love, Merlin Theodore, & Mariappan Parans Paranthaman. (2021). ACS Applied Polymer Materials(3). https://doi.org/10.1021/acsapm.0c01294
IEEE [1] Gregory S. Larsen, Yongqiang Cheng, Luke L. Daemen, Tej N. Lamichhane, Dale K. Hensley, Kunlun Hong, Harry M. Meyer, III, Steven J. Monaco, Alan M. Levine, Richard J. Lee, Emma Betters, Kim Sitzlar, Jesse Heineman, Justin West, Peter Lloyd, Vlastimil Kunc, Lonnie Love, Merlin Theodore, and Mariappan Parans Paranthaman, ACS Applied Polymer Materials, no. 3, 2021, doi: 10.1021/acsapm.0c01294. keywords: {isotactic polypropylene;melt blowing;N95;filtration;crystallization;electret}