Effect of Ti Content on Microstructure and Properties of U-Ti Alloy AITranslate
Abstract AITranslate
The samples of U-0.5%Ti,U-0.75%Ti and U-0.95%Ti alloys were prepared by vacuum induction melting,and then the effect of Ti content on alloy microstructure,room-temperature tensile perfor-mance and corrosion resistance was studied.The results show that the U-Ti alloys with the above three compositions have the microstructure mainly composited of acicular and biconvex lenticular martensite,and their main phases areα′and U2Ti.The grains of U-Ti alloy are gradually refined and the content of U2Ti phase increases with the increase of Ti content.As Ti content increases,the strength of U-Ti alloy gradually increases,while the plasticity gradually decreases,and the corrosion resistance slightly decreases.
KeyWords AITranslate
1白彬,杨江荣,陆雷,鲜晓斌,郎定木,董平.铀表面Ti/Al复合镀层在腐蚀气体中的腐蚀行为[J].中国有色金属学报,2004,14(6):967-972. 被引量：6
2胡贵超,杨江荣,纪和菲,李丘林.旋转磁场下铀中夹杂物运动行为模拟与实验研究[J].热加工工艺,2015,44(1):69-72. 被引量：4
3邱志聪,邹东利,何立峰,赵雅文,肖大武,郭亚昆.贮存金属铀的力学性能及腐蚀行为[J].功能材料,2017,48(4):4127-4130. 被引量：1
4刘婷婷,张鹏程,何立峰,白彬.U-Ti合金的动态压缩性能及剪切特征[J].稀有金属材料与工程,2010,39(5):800-803. 被引量：5
5李鹏杰,初哲,周刚,王长利,胡玉涛,戴湘晖,杨慧,沈子楷,柯明.挤压态和时效态U-Ti合金动态压缩及绝热剪切性能研究[J].兵器材料科学与工程,2019,0(5):116-120. 被引量：2
1肖传民,舒德龙,谢君,侯桂臣,华涵钰.Hf对一种高W镍基合金组织及拉伸性能的影响[J].沈阳工业大学学报,2021,43(4):396-401. 被引量：1
2孙萌,姜周华,李阳,马帅,陈常勇,刘航.Ce-Mg复合处理对含硫齿轮钢SCr420H洁净度的影响[J].钢铁,2021,56(7):47-55. 被引量：5
3史永刚.交联改性对羽毛球拍胶粘剂性能的影响研究[J].粘接,2021,47(8):42-45. 被引量：2
4王璐钰,李玉琼,蔡榕.空间激光干涉仪光程倾斜耦合噪声抑制[J].光学精密工程,2021,29(7):1491-1498. 被引量：3
5郝建强,张金山,许春香,王红霞.B_(4)C对Mg-Zn-Y-Mn镁合金微观组织和力学性能的影响[J].材料热处理学报,2021,42(8):32-39. 被引量：1
6邹宗轩,刘政军,韩旭.W对Fe-Cr-C-W-B系堆焊合金组织和性能的影响[J].焊接学报,2021,42(7):91-96. 被引量：3
7杨飞雪,沈卓,刘恩泽,郭金花,宁礼奎,佟健,谭政,李海英,郑志.Si含量对选区激光熔化制备GH3536合金样品微观组织影响[J].有色矿冶,2021,37(4):38-40.
8胡家齐,王长军,魏来,杨哲,梁剑雄,董瀚.VIGA法与PREP法制备不锈钢粉末的内部孔洞对比研究[J].粉末冶金工业,2021,31(4):11-15. 被引量：5
Basic Information:
DOI：
Chinese Library Classification Number:TG146.8[金属学及工艺—金属材料]
Citation Information:
The samples of U-0.5%Ti,U-0.75%Ti and U-0.95%Ti alloys were prepared by vacuum induction melting,and then the effect of Ti content on alloy microstructure,room-temperature tensile perfor-mance and corrosion resistance was studied.The results show that the U-Ti alloys with the above three compositions have the microstructure mainly composited of acicular and biconvex lenticular martensite,and their main phases areα′and U2Ti.The grains of U-Ti alloy are gradually refined and the content of U2Ti phase increases with the increase of Ti content.As Ti content increases,the strength of U-Ti alloy gradually increases,while the plasticity gradually decreases,and the corrosion resistance slightly decreases.
quote
| GB/T 7714-2015 | [1] WEI Yi-yun, XU Qing-dong, HU Gui-chao, et al. Effect of Ti Content on Microstructure and Properties of U-Ti Alloy[J]. Rare Metals and Cemented Carbides, 2021(4): 67-70. |
| MLA | [1] WEI Yi-yun, et al., "Effect of Ti Content on Microstructure and Properties of U-Ti Alloy." Rare Metals and Cemented Carbides, no. 4, 2021, pp. 67-70. |
| APA | [1] WEI Yi-yun, XU Qing-dong, HU Gui-chao, TANG Qing-fu, & WANG Zhen-hong. (2021). Effect of Ti Content on Microstructure and Properties of U-Ti Alloy. Rare Metals and Cemented Carbides(4), 67-70. |
| IEEE | [1] WEI Yi-yun, XU Qing-dong, HU Gui-chao, TANG Qing-fu, and WANG Zhen-hong, "Effect of Ti Content on Microstructure and Properties of U-Ti Alloy," Rare Metals and Cemented Carbides, no. 4, pp. 67-70, 2021. keywords: {U-Ti alloy;Ti content;microstructure;mechanical property;corrosion resistance} |