daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Nonaqueous Interfacial Polymerization-Derived Polyphosphazene Films for Sieving or Blocking Hydrogen Gas AITranslate

University of Twente; University of Valladolid; Delft University of Technology; University of Twente; University of Twente
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

A series of cyclomatrix polyphosphazene films have been prepared by nonaqueous interfacial polymerization (IP) of small aromatic hydroxyl compounds in a potassium hydroxide dimethylsulfoxide solution and hexachlorocyclotriphosphazene in cyclohexane on top of ceramic supports. Via the amount of dissolved potassium hydroxide, the extent of deprotonation of the aromatic hydroxyl compounds can be changed, in turn affecting the molecular structure and permselective properties of the thin polymer networks ranging from hydrogen/oxygen barriers to membranes with persisting hydrogen permselectivities at high temperatures. Barrier films are obtained with a high potassium hydroxide concentration, revealing permeabilities as low as 9.4 × 10–17 cm3 cm cm–2 s–1 Pa–1 for hydrogen and 1.1 × 10–16 cm3 cm cm–2 s–1 Pa–1 for oxygen. For films obtained with a lower concentration of potassium hydroxide, single gas permeation experiments reveal a molecular sieving behavior, with a hydrogen permeance of around 10–8 mol m–2 s–1 Pa–1 and permselectivities of H2/N2 (52.8), H2/CH4 (100), and H2/CO2 (10.1) at 200 °C.

KeyWords AITranslate

hydrogen separation hydrogen barrier nonaqueous interfacial polymerization oxygen barrier polyphosphazene thermal stability
No data

Basic Information:

DOI:https://doi.org/10.1021/acsapm.2c02022

Chinese Library Classification Number:

Citation Information:

A series of cyclomatrix polyphosphazene films have been prepared by nonaqueous interfacial polymerization (IP) of small aromatic hydroxyl compounds in a potassium hydroxide dimethylsulfoxide solution and hexachlorocyclotriphosphazene in cyclohexane on top of ceramic supports. Via the amount of dissolved potassium hydroxide, the extent of deprotonation of the aromatic hydroxyl compounds can be changed, in turn affecting the molecular structure and permselective properties of the thin polymer networks ranging from hydrogen/oxygen barriers to membranes with persisting hydrogen permselectivities at high temperatures. Barrier films are obtained with a high potassium hydroxide concentration, revealing permeabilities as low as 9.4 × 10–17 cm3 cm cm–2 s–1 Pa–1 for hydrogen and 1.1 × 10–16 cm3 cm cm–2 s–1 Pa–1 for oxygen. For films obtained with a lower concentration of potassium hydroxide, single gas permeation experiments reveal a molecular sieving behavior, with a hydrogen permeance of around 10–8 mol m–2 s–1 Pa–1 and permselectivities of H2/N2 (52.8), H2/CH4 (100), and H2/CO2 (10.1) at 200 °C.

quote

GB/T 7714-2015 [1] Farzaneh Radmanesh, Alberto Tena, Ernst J. R. Sudhölter, et al. ACS Applied Polymer Materials, 2023(5). DOI:10.1021/acsapm.2c02022.
MLA [1] Farzaneh Radmanesh, et al., ACS Applied Polymer Materials, no. 5, 2023, https://doi.org/10.1021/acsapm.2c02022.
APA [1] Farzaneh Radmanesh, Alberto Tena, Ernst J. R. Sudhölter, Mark A. Hempenius, & Nieck E. Benes. (2023). ACS Applied Polymer Materials(5). https://doi.org/10.1021/acsapm.2c02022
IEEE [1] Farzaneh Radmanesh, Alberto Tena, Ernst J. R. Sudhölter, Mark A. Hempenius, and Nieck E. Benes, ACS Applied Polymer Materials, no. 5, 2023, doi: 10.1021/acsapm.2c02022. keywords: {hydrogen separation;hydrogen barrier;nonaqueous interfacial polymerization;oxygen barrier;polyphosphazene;thermal stability}