The Effects of Preparation Processes on the Microstructure and Properties of AgSnO_2(8)In_2O_3(4)Electrical Contact Material AITranslate
Abstract AITranslate
AgSnO2(8)In2O3(4)electrical contact material was prepared by powder metallurgy,alloy powder pre-oxidation and pressurized internal oxidation,respectively.The influences were studied of different preparation processes on the microstructure and properties of the AgSnO2In2O3 electrical contact material.The results show that the AgSnO2In2O3 material prepared by pressurized internal oxidation has the most uniform microstructure,highest relative density and maximum microhardness,while the material prepared by powder metallurgy has the highest electric conductivity.Under the electrical contact condition of DC resistive load,AgSnO2In2O3 material prepared by pressurized internal oxidation has the best arc erosion resistance with the lowest weight loss and minimum arc erosion area of contact surface.
KeyWords AITranslate
1王松,付作鑫,王塞北,沈月,谢明,张吉明.银基电接触材料的研究现状及发展趋势[J].贵金属,2013,34(1):79-83. 被引量：54
2J. Swingler,A. Sumption.Arc erosion of AgSnO_2 electrical contacts at different stages of a break operation[J].稀有金属：英文版,2010(3):248-254. 被引量：38
3黎玉盛,符世继,杨有才,张健康,尹长青,曾荣川,张春荣,谢明.机械合金化法制备AgSnO_2Y_2O_3电接触材料的组织和性能研究[J].贵金属,2007,28(S1):6-8. 被引量：9
4甘卫平,李晶.高能球磨及掺杂对AgSnO_2触头材料性能的影响[J].粉末冶金材料科学与工程,2006,11(5):295-299. 被引量：6
5张尧卿,郑冀.AgSnO_2电接触材料研究概述[J].材料导报,2006,20(4):53-57. 被引量：23
6符世继,谢明,陈力,杨有才,黎玉盛,刘莉.合金粉末预氧化法制备Ag-SnO_2-Y_2O_3电接触材料的研究[J].稀有金属,2005,29(4):448-451. 被引量：30
7张昆华,管伟明,孙加林,卢峰,陈敬超,周晓龙,杜焰.AgSnO_2电接触材料的制备和直流电弧侵蚀形貌特征[J].稀有金属材料与工程,2005,34(6):924-927. 被引量：44
8周兆锋,甘卫平.AgSnO_2触头材料的研究进展[J].稀有金属与硬质合金,2004,32(2):53-56. 被引量：24
9谭光讯,覃向忠.高压氧化技术在制造AgSnO_2电触头材料上的应用[J].电工材料,2004(2):11-14. 被引量：11
10刘海英,王亚平,丁秉钧.纳米AgSnO_2触头材料的制备与组织分析[J].稀有金属材料与工程,2002,31(2):122-124. 被引量：39
1郑晶,郭天福,付翀.含微量元素的Ag-SnO2触头材料的研究进展[J].中国材料科技与设备,2015,11(5):52-54.
2杨钢,严继康.2015年云南金属材料与加工年评[J].云南冶金,2016,45(2):96-108.
3曹风,王俊勃,刘松涛,刘永飞,思芳.AgSnO_2触头材料中添加物的研究与发展[J].电工材料,2016(3):34-37. 被引量：8
4王海涛,文攀龙,梁磊,朱艳彩,王幸伟.润湿性对AgSnO_2TiO_2触头材料性能的影响[J].电子元件与材料,2016,35(7):80-83. 被引量：3
5蒋义斌,冯朋飞,黄兴隆,陈华鹏,李镇鹏,吴小龙.内氧化法AgSnO2In2O3电触头材料研究现状[J].电工材料,2017,0(2):30-34. 被引量：7
6角坤,周江猛,胡安亚,周晓龙.原位反应合成AgCuO复合材料累计塑性变形的组织分析[J].电工材料,2018(2):3-6. 被引量：2
7张万良.粉末冶金工艺对制备工艺材料性能的影响[J].粘接,2019,40(12):41-44. 被引量：2
8周建仁,陈松,毕亚男,王塞北,谢明,刘满门,王松.银基电接触材料的最新研究进展和展望[J].贵金属,2020,41(S01):1-16. 被引量：7
9王金龙,付翀,宁静,李旭,李清馨,路杨.Ag-SnO_(2)电接触材料的研究进展及发展趋势[J].贵金属,2021,42(3):85-92. 被引量：1
10穆成法,沈涛,王开旭,陈晓统,周馨,李跃,杨辉.Cu改性AgSnO_(2)In_(2)O_(3)电接触材料的内氧化制备及其电气性能[J].稀有金属材料与工程,2023,52(2):575-585.
1王海涛,王幸伟.烧结温度对AgSnO_2/Bi_2O_3触头材料性能的影响[J].电器与能效管理技术,2017(8):29-31. 被引量：1
2张天锦,刘心宇,蒙建洲,李耀林,赵浩融.SnO_2粒度对化学共沉积法AgSnO_2(12)触头材料性能的影响[J].电工材料,2017(3):3-6. 被引量：1
3王奐然,王振宇,罗加悦.化学共沉积法Ag基触头材料性能研究[J].电工材料,2017(3):7-10. 被引量：1
4廖思远,甘启达,杜俐颖.高频红外碳硫仪法测银石墨合金中的C含量[J].电工材料,2017(4):20-22. 被引量：2
5赵彩甜,王景芹,蔡亚楠,王海涛.纳米AgSnO_2/Bi_2O_3触头材料的性能及导电机理研究[J].人工晶体学报,2017,46(12):2432-2437. 被引量：2
6王珩,袁欢,何斌,冯兴海,李杰,颜小芳.交流接触器用触头材料研究综述[J].电器与能效管理技术,2018(3):1-4. 被引量：4
7李志国,周晓龙,胡日茗,于杰,刘满门.复相增强AgMeO电触头材料的研究进展[J].材料导报,2018,32(A01):81-85. 被引量：6
8周晓龙,熊爱虎,刘满门,郑忠,于杰,王立惠.AgSnO2NiO电触头材料电接触性能的研究[J].稀有金属材料与工程,2019,0(9):2885-2892. 被引量：14
9刘琳.新型银氧化锡触头材料在汽车电器中的应用[J].汽车电器,2020(6):79-80. 被引量：1
10冯朋飞,秦琳,卢菲,李镇鹏,刘晗,黄兴隆.AgCuO电触头材料研究现状[J].电工材料,2020(3):3-6. 被引量：3
1张锡华.玻璃的表面侵蚀[J].玻璃,1989,16(4):38-44. 被引量：4
2日本东索开发高选择性苯胺催化剂[J].石油化工技术与经济,2015,0(6):22-22.
3黄清伟,高积强,金志浩.热处理温度对反应烧结碳化硅材料组织与性能的影响[J].耐火材料,2000,34(1):17-19. 被引量：10
4李安邦,高瑞林.聚丙烯腈纤维的固相预氧化工艺[J].炭素技术,1989(3):28-32. 被引量：1
5张占文,唐永建,李波,王朝阳,漆小波,陈素芬,刘一杨,翟世明.表面侵蚀对玻璃微球气体渗透性能的影响[J].硅酸盐通报,2006,25(6):172-175. 被引量：3
6姚磊,朱春城,吕玲秀,徐微微.热处理对Ti_3AlC_2瓷块体材料组织的影响[J].材料热处理学报,2014,35(9):33-38. 被引量：3
7吴林丽,姚广春,刘宜汉,张晓明.粉煤灰颗粒HF酸表面改性处理[J].有色矿冶,2004,20(5):37-40. 被引量：7
8陈文杰.启示窗[J].中学科技,2008(11):31-31.
9袁忆博,张霄宇.预氧化处理湖泊含藻水研究[J].中国科技信息,2007(8):25-26. 被引量：2
10刘胜明,汤爱涛,陈敏,潘复生.添加物对Al_2O_3-TiC/Ti(C,N)系陶瓷复合材料组织和性能的影响[J].材料导报,2011,25(13):48-53. 被引量：2
Basic Information:
DOI：
Chinese Library Classification Number:TQ131.22[化学工程—无机化工]
Citation Information:
AgSnO2(8)In2O3(4)electrical contact material was prepared by powder metallurgy,alloy powder pre-oxidation and pressurized internal oxidation,respectively.The influences were studied of different preparation processes on the microstructure and properties of the AgSnO2In2O3 electrical contact material.The results show that the AgSnO2In2O3 material prepared by pressurized internal oxidation has the most uniform microstructure,highest relative density and maximum microhardness,while the material prepared by powder metallurgy has the highest electric conductivity.Under the electrical contact condition of DC resistive load,AgSnO2In2O3 material prepared by pressurized internal oxidation has the best arc erosion resistance with the lowest weight loss and minimum arc erosion area of contact surface.
quote
| GB/T 7714-2015 | [1] WANG Song, ZHANG Ji-ming, LIU Man-men, et al. The Effects of Preparation Processes on the Microstructure and Properties of AgSnO_2(8)In_2O_3(4)Electrical Contact Material[J]. Rare Metals and Cemented Carbides, 2015(2): 45-49. |
| MLA | [1] WANG Song, et al., "The Effects of Preparation Processes on the Microstructure and Properties of AgSnO_2(8)In_2O_3(4)Electrical Contact Material." Rare Metals and Cemented Carbides, no. 2, 2015, pp. 45-49. |
| APA | [1] WANG Song, ZHANG Ji-ming, LIU Man-men, XIE Ming, & CHEN Song. (2015). The Effects of Preparation Processes on the Microstructure and Properties of AgSnO_2(8)In_2O_3(4)Electrical Contact Material. Rare Metals and Cemented Carbides(2), 45-49. |
| IEEE | [1] WANG Song, ZHANG Ji-ming, LIU Man-men, XIE Ming, and CHEN Song, "The Effects of Preparation Processes on the Microstructure and Properties of AgSnO_2(8)In_2O_3(4)Electrical Contact Material," Rare Metals and Cemented Carbides, no. 2, pp. 45-49, 2015. keywords: {electrical contact material;AgSnO2In2O3;preparation process;pressurized internal oxidation;microstructure;property} |