Effect of TiC Content on Microstructure and Properties of Steel-bonded Cemented Carbides AITranslate
Abstract AITranslate
Steel-bonded cemented carbides were prepared by ball milling,die forming and vacuum sintering with atomized iron powders as the bonding phase and TiC particles as the hard phase.The results show that steel-bonded cemented carbides of high densification degree and desired microstructure and properties can be obtained by vacuum sintering at 1 350℃.With increasing TiC content,the cemented carbides have more regular and uniform grains,deceased density and bending strength and increased hardness.When TiC content is 50%,the alloy has the highest density and bending strength of 6.11g/cm^3 and 1 579.48 MPa,respectively.When TiC content is 60%,its hardness reaches a maximum value of HRC86.3.
KeyWords AITranslate
1王学文,王明玉.石煤提钒工艺现状及发展趋势[J].钢铁钒钛,2012,33(1):8-14. 被引量：36
2李昌林,周云峰,费海霞,周向阳,李劼.石煤提钒工艺研究及应用现状[J].稀有金属与硬质合金,2012,40(6):9-14. 被引量：12
3向平,冯其明,钮因健,潘安新.选矿富集阿克苏石煤钒矿中的钒[J].材料研究与应用,2010,4(1):65-70. 被引量：26
4孙伟,王丽,曹学锋,刘润清,徐龙华,韩海生.石煤提钒的浮选工艺及吸附机理[J].中国有色金属学报,2012,22(7):2069-2074. 被引量：34
5姚金江,吴海国,李婕.高钙低品位石煤提取五氧化二钒新工艺[J].湖南有色金属,2009,25(6):21-23. 被引量：18
6徐懋,黄宪法,桂林.低品位石煤浮选及提钒工艺研究[J].山西冶金,2013,36(6):6-9. 被引量：4
7武宝新,王晖,符剑刚,林清泉,王重庆.湖南某石煤钒矿选煤选钒的探索试验[J].稀有金属与硬质合金,2014,42(3):1-6. 被引量：7
8田学达,杨康,杨用龙,谢畅.添加剂SMTV01对石煤酸浸提钒的影响[J].湿法冶金,2009,28(4):218-221. 被引量：6
9吴海鹰,戴子林,谷利君,李桂英.含氟助浸剂对钒矿的硫酸浸出和萃钒的影响研究[J].矿冶工程,2010,30(2):83-84. 被引量：18
10梁泰然,戴子林,郝文彬.助浸剂对石煤提钒的作用[J].矿冶工程,2010,30(6):69-71. 被引量：14
1陈飞,龙坚战,陈冲,李强,申梦龙,夏艳萍,冉丽萍.Ni_3Al含量对WC基钢结硬质合金组织与性能的影响[J].中国有色金属学报,2018,28(1):126-134. 被引量：4
2马会,罗骥.TiC−NiCrCoMo钢结硬质合金的制备与高温氧化性能[J].粉末冶金技术,2021,39(2):147-152. 被引量：1
3酆纲,张忠伦,雷启腾,李桂金,刘振森.钢结硬质合金烧结中的金属挥发问题研究[J].中国建材科技,2022,31(3):50-53.
4杨宁,李立凯.激光功率和粉末含量对（B2O3+WO3+C）镍基熔覆层硬度的影响[J].应用激光,2019,0(4):574-579. 被引量：1
1时凯华,昝秀颀,杨新宇,董凯林,顾金宝,曾伟.含钌WC-Co硬质合金研究现状及展望[J].硬质合金,2018,35(5):315-323. 被引量：4
2刘龙,乔建,屈小军,莫振泽,张建峰,闵凡路.碳化钨-镍铝复合材料的放电等离子体原位烧结制备与抗腐蚀性能研究[J].河南科学,2020,38(6):879-885. 被引量：1
3秦永强,袁健,罗来马,昝祥,朱晓勇,吴玉程.固-液掺杂WC-Co-Y_(2)(Zr)O_(3)硬质合金的制备与组织性能[J].中国有色金属学报,2021,31(12):3566-3573. 被引量：1
4邢艳丽,江文奇,井文华.表面激光熔覆对体育器材硬度的改善[J].激光与红外,2022,52(1):29-34.
5陈刚,邓人钦,贾寓真,刘国跃,吕蓉.WC_(p)/M42高速钢复合材料的制备与性能[J].有色金属工程,2022,12(8):30-38. 被引量：1
6石亚丽,黄智泉,魏炜,李恒,高站起,张永生.真空熔结钢结硬质合金/Q235钢界面组织性能研究[J].粉末冶金技术,2023,41(2):116-124. 被引量：1
1程卫华.TiC含量和烧结工艺对AlN-TiC复相陶瓷烧结性能的影响[J].机械工程材料,2012,36(10):47-49. 被引量：1
2张志明,程晓文,刘志明.转炉镁钙碳大砖的研究及应用[J].炼钢,2001(2):27-29. 被引量：1
3张志明,程晓文,刘志明.镁钙碳大砖在转炉炉衬中的开发应用[J].冶金丛刊,2002(6):37-39. 被引量：1
4程卫华.TiC含量对AlN-TiC复相材料导热性能的影响[J].盐城工学院学报：自然科学版,2011,24(1):35-38. 被引量：1
5罗军明,廖佳,陆磊,徐吉林.微波烧结制备WC-TiC-Co硬质合金的组织和性能研究[J].材料导报,2013,27(20):103-105. 被引量：5
6李小峰,肖志瑜,罗飞,吴苑标,邱诚.TiC含量对TiCp/M2高速钢复合材料性能的影响[J].粉末冶金工业,2013,23(4):39-44. 被引量：4
7罗军明,徐吉林,邓莉萍,钟震晨.TiC钢结硬质合金表面特性[J].材料热处理学报,2014,35(2):174-179. 被引量：3
8谢丽初,尹邦跃.碳化硼-硼化钛复合陶瓷的制备[J].热加工工艺,2006,35(14):30-32. 被引量：3
9吕庆,黄宏虎,陈树军,刘小杰,孙艳芹,丁海超.固体碳和TiC含量对含钛高炉渣性能的影响[J].钢铁钒钛,2015,36(2):84-88. 被引量：2
10宋桂明,王玉金,周玉,雷廷权.TiC含量对钨基材料性能的影响[J].粉末冶金技术,2001,19(5):266-269. 被引量：2
Basic Information:
DOI：
Chinese Library Classification Number:TF125.32[冶金工程—粉末冶金]
Citation Information:
Steel-bonded cemented carbides were prepared by ball milling,die forming and vacuum sintering with atomized iron powders as the bonding phase and TiC particles as the hard phase.The results show that steel-bonded cemented carbides of high densification degree and desired microstructure and properties can be obtained by vacuum sintering at 1 350℃.With increasing TiC content,the cemented carbides have more regular and uniform grains,deceased density and bending strength and increased hardness.When TiC content is 50%,the alloy has the highest density and bending strength of 6.11g/cm^3 and 1 579.48 MPa,respectively.When TiC content is 60%,its hardness reaches a maximum value of HRC86.3.
quote
| GB/T 7714-2015 | [1] ZHANG Lei, CHEN Wen, SUN Hai-shen, et al. Effect of TiC Content on Microstructure and Properties of Steel-bonded Cemented Carbides[J]. Rare Metals and Cemented Carbides, 2016(6): 64-67. |
| MLA | [1] ZHANG Lei, et al., "Effect of TiC Content on Microstructure and Properties of Steel-bonded Cemented Carbides." Rare Metals and Cemented Carbides, no. 6, 2016, pp. 64-67. |
| APA | [1] ZHANG Lei, CHEN Wen, SUN Hai-shen, JIE Chuan-di, LI Guo-ping, & GUO Li-bo. (2016). Effect of TiC Content on Microstructure and Properties of Steel-bonded Cemented Carbides. Rare Metals and Cemented Carbides(6), 64-67. |
| IEEE | [1] ZHANG Lei, CHEN Wen, SUN Hai-shen, JIE Chuan-di, LI Guo-ping, and GUO Li-bo, "Effect of TiC Content on Microstructure and Properties of Steel-bonded Cemented Carbides," Rare Metals and Cemented Carbides, no. 6, pp. 64-67, 2016. keywords: {steel-bonded cemented carbide;TiC content;microstructure and property;densification;vacuum sintering} |