Research on the Change of Mechanical Properties of Ti-Mo Alloy during Hydrogen Absorption AITranslate
Abstract AITranslate
Research on the mechanical properties of Ti-Mo alloy was carried out during hydrogen absorption,and test data of mechanical properties of alloy microstructure were obtained,reflecting its characteristics of elastic and plastic deformation in microscopic field.The results show that the average value of Vickers microhardness HV_（0.5） of Ti-Mo alloy is 332 before hydrogen absorption and 419 after hydrogen absorption with the test force of 4.903 N.The compressive strength of the alloy is higher than 1 730 MPa either before or after hydrogen absorption,and the maximum load force in the test is 50 kN.The change of mechanical properties of Ti-Mo alloy during hydrogen absorption is caused by its phase transformation.
KeyWords AITranslate
1郑华,刘实,赵越,王隆保.Ti-10Mo双相合金的吸氢性能[J].金属学报,2003,39(5):526-529. 被引量：9
2施立群,周筑颖,赵国庆.Ti-Mo合金薄膜的储氢特性和抗氢脆能力[J].金属学报,2000,36(5):530-534. 被引量：23
3王伟伟,龙兴贵,黄刚.Ti-Mo合金氘化物热解吸过程研究[J].同位素,2008,21(4):193-197. 被引量：2
4赵越,郑华,刘实,杨锐,王隆保.Ti-Mo合金的结构及吸放氢性能研究[J].金属学报,2003,39(1):89-93. 被引量：24
5王伟伟,龙兴贵.Ti-Mo合金的吸放氢动力学[J].核化学与放射化学,2007,29(2):80-84. 被引量：8
6GB/T4340.1-2009.金属材料--维氏硬度试验第1部分:试验方法[S].
7GB/T4340.2-2012.金属材料--维氏硬度试验第2部分:硬度计的检验[S].
8GB/T4340.3-2012.金属材料--维氏硬度试验第3部分:标准硬度块的标定[S].
9GB/T4340.4-2009.金属材料--维氏硬度试验第4部分:硬度值表[S].
10GB/T25898-2010.仪器化纳米压入试验方法:薄膜的压入硬度和弹性模量[S].
1向力,闵小华,弭光宝.体心立方Ti-Mo基钛合金应用研究进展[J].材料工程,2017,45(7):128-136. 被引量：8
1邵晖,单迪,王凯旋,张赛飞,白力静,张国君,赵永庆.超细α相析出对Ti-55531合金力学性能的影响[J].材料热处理学报,2019,40(9):32-38. 被引量：1
2王艳晶,徐再东,徐荣正,胡秋野,施冬雨,芦鑫.高氧含量Ti-15Mo合金的组织性能研究[J].稀有金属材料与工程,2020,49(7):2425-2430.
3信云鹏,朱知寿,王新南,商国强,祝力伟,李明兵,李静,刘格辰.应变率对TB17钛合金亚稳β晶粒变形机制的影响[J].材料工程,2020,48(12):141-147. 被引量：3
4谭江红,徐小兵,刘刚.Ti-15Mo-Cux系钛合金显微组织及性能研究[J].内江科技,2021,42(2):38-40.
5戴进财,闵小华,周克松,姚凯,王伟强.预变形与等温时效耦合作用下Ti-10Mo-1Fe/3Fe层状合金的力学性能[J].金属学报,2021,57(6):767-779. 被引量：2
6冯甜,炊鹏飞,李文刚,张曼雪,王国迪,景然,李江华.固溶处理对Ti-10Mo合金力学性能和腐蚀行为的影响[J].材料热处理学报,2021,42(9):76-82. 被引量：2
7姚凯,闵小华.变形温度与应变速率耦合作用对TWIP效应Ti-15Mo合金力学性能的影响[J].材料工程,2022,50(8):133-142.
8王彦龙,马昕宇,王庆相.Ti-Ta-Mo合金的制备及其力学性能[J].西安工程大学学报,2022,36(6):31-37.
1梁丹丹,王德志,王小鹰,董小嘉,洪海侠.医用Ti-Mo合金的制备及性能分析[J].稀有金属材料与工程,2013,42(12):2607-2612. 被引量：12
2范兴平,任小青.钼含量对钛钼合金组织和力学性能的影响[J].热加工工艺,2017,46(4):83-85.
3范兴平,任小青.钼含量对钛钼合金组织和力学性能的影响[J].热加工工艺,2017,46(6):46-48. 被引量：2
4路新,何新波,李世琼,曲选辉.放电等离子烧结TiAl基合金的显微组织及力学性能[J].北京科技大学学报,2008,30(3):254-257. 被引量：18
5周国定,Kamkin A.N.,廖强强.钛钼合金电极在酸性介质中的电化学研究[J].腐蚀与防护,2005,26(8):323-325. 被引量：3
6王光耀,王浩.钛钼合金在盐酸溶液中形成的钝化膜研究[J].中国腐蚀与防护学报,1997,17(2):121-128. 被引量：8
7王浩,王光耀,狄峥.用XPS研究Ti－15Mo合金在盐酸中钝化膜的组成[J].北京化工大学学报：自然科学版,1996,23(2):71-75.
8魏征宇.基于I-DEAS的挤压机挤压梁优化设计[J].锻压装备与制造技术,2014,49(1):54-56. 被引量：1
9王光耀,狄峥,杨晓波,马仁川.用等离子质谱法研究钛钼合金钝化膜[J].北京化工学院学报,1993,20(3):95-99. 被引量：2
10王宽,梁清华,周恺,王辉,郑伟.惰气熔融-红外吸收法测定钛钼合金中氧[J].冶金分析,2015,35(3):61-63. 被引量：13
Basic Information:
DOI：
Chinese Library Classification Number:TG146.23[金属学及工艺—金属材料]
Citation Information:
Research on the mechanical properties of Ti-Mo alloy was carried out during hydrogen absorption,and test data of mechanical properties of alloy microstructure were obtained,reflecting its characteristics of elastic and plastic deformation in microscopic field.The results show that the average value of Vickers microhardness HV_（0.5） of Ti-Mo alloy is 332 before hydrogen absorption and 419 after hydrogen absorption with the test force of 4.903 N.The compressive strength of the alloy is higher than 1 730 MPa either before or after hydrogen absorption,and the maximum load force in the test is 50 kN.The change of mechanical properties of Ti-Mo alloy during hydrogen absorption is caused by its phase transformation.
quote
| GB/T 7714-2015 | [1] MAO Yu-hong, BING Wen-zeng, YAN Hong-bo, et al. Research on the Change of Mechanical Properties of Ti-Mo Alloy during Hydrogen Absorption[J]. Rare Metals and Cemented Carbides, 2016(2): 26-29. |
| MLA | [1] MAO Yu-hong, et al., "Research on the Change of Mechanical Properties of Ti-Mo Alloy during Hydrogen Absorption." Rare Metals and Cemented Carbides, no. 2, 2016, pp. 26-29. |
| APA | [1] MAO Yu-hong, BING Wen-zeng, YAN Hong-bo, ZHOU Xiao-song, HUANG Gang, ZHANG Wei-guang, & LONG Xing-gui. (2016). Research on the Change of Mechanical Properties of Ti-Mo Alloy during Hydrogen Absorption. Rare Metals and Cemented Carbides(2), 26-29. |
| IEEE | [1] MAO Yu-hong, BING Wen-zeng, YAN Hong-bo, ZHOU Xiao-song, HUANG Gang, ZHANG Wei-guang, and LONG Xing-gui, "Research on the Change of Mechanical Properties of Ti-Mo Alloy during Hydrogen Absorption," Rare Metals and Cemented Carbides, no. 2, pp. 26-29, 2016. keywords: {Ti-Mo alloy;hydrogen absorption;mechanical property;Vickers microhardness;room temperature compression performance;phase} |