daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Ternary Blend Organic Solar Cells Incorporating Ductile Conjugated Polymers with Conjugation Break Spacers AITranslate

University of Southern California; University of Southern California; University of Southern California; University of Southern California
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

A broad family of ductile semirandom donor–acceptor (D–A) copolymers with 8-carbon alkyl conjugation break spacer (CBS) units were incorporated into ternary blend organic solar cells in order to determine their impact on the electrical metrics of solar cell performance. The goal of this study was to elucidate potential co-optimization strategies for photovoltaic and mechanical properties in organic solar cells. The ternary blended active layers were based on two polymer donors and the acceptor [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM). In all cases, the majority polymer donor component was the previously reported fully conjugated semirandom polymer P3HTT-ehDPP-10%, comprised of 80% 3-hexylthiophene, 10% diketopyrrolopyrrole (DPP) with 2-ethylhexyl (eh) side chains, and 10% thiophene. As the second donor, three different classes of CBS polymers were used, where the spacer length was kept constant at 8 methylene units. The mechanical properties of these polymers are quite notable with moduli as low as 8.54 MPa and fracture strains as high as 432%. However, it was found that as ductility increased, hole mobility decreased. In this study, we observed that the hole mobilities of the ternary active layers generally increased upon increasing the content of the CBS polymer up to 15% of the overall donor fraction. The higher carrier mobilities likely contribute to the higher JSC observed in many of the ternary devices. The as-cast ternary solar cells made in ambient environment without any pre/post treatment gave strong performance up to 25% of CBS polymer loading. This work demonstrates that introducing highly stretchable CBS polymers with poor charge mobility does not adversely affect solar cell performance, offering insights into the development of ternary strategies for flexible/stretchable organic solar cells.

KeyWords AITranslate

ternary organic solar cells conjugated polymers conjugationbreak spacer semirandom polymers elastic polymers
No data

Basic Information:

DOI:https://doi.org/10.1021/acsapm.1c00213

Chinese Library Classification Number:

Citation Information:

A broad family of ductile semirandom donor–acceptor (D–A) copolymers with 8-carbon alkyl conjugation break spacer (CBS) units were incorporated into ternary blend organic solar cells in order to determine their impact on the electrical metrics of solar cell performance. The goal of this study was to elucidate potential co-optimization strategies for photovoltaic and mechanical properties in organic solar cells. The ternary blended active layers were based on two polymer donors and the acceptor [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM). In all cases, the majority polymer donor component was the previously reported fully conjugated semirandom polymer P3HTT-ehDPP-10%, comprised of 80% 3-hexylthiophene, 10% diketopyrrolopyrrole (DPP) with 2-ethylhexyl (eh) side chains, and 10% thiophene. As the second donor, three different classes of CBS polymers were used, where the spacer length was kept constant at 8 methylene units. The mechanical properties of these polymers are quite notable with moduli as low as 8.54 MPa and fracture strains as high as 432%. However, it was found that as ductility increased, hole mobility decreased. In this study, we observed that the hole mobilities of the ternary active layers generally increased upon increasing the content of the CBS polymer up to 15% of the overall donor fraction. The higher carrier mobilities likely contribute to the higher JSC observed in many of the ternary devices. The as-cast ternary solar cells made in ambient environment without any pre/post treatment gave strong performance up to 25% of CBS polymer loading. This work demonstrates that introducing highly stretchable CBS polymers with poor charge mobility does not adversely affect solar cell performance, offering insights into the development of ternary strategies for flexible/stretchable organic solar cells.

quote

GB/T 7714-2015 [1] Negar Kazerouni, Elizabeth L. Melenbrink, Pratyusha Das, et al. ACS Applied Polymer Materials, 2021(3). DOI:10.1021/acsapm.1c00213.
MLA [1] Negar Kazerouni, et al., ACS Applied Polymer Materials, no. 3, 2021, https://doi.org/10.1021/acsapm.1c00213.
APA [1] Negar Kazerouni, Elizabeth L. Melenbrink, Pratyusha Das, & Barry C. Thompson. (2021). ACS Applied Polymer Materials(3). https://doi.org/10.1021/acsapm.1c00213
IEEE [1] Negar Kazerouni, Elizabeth L. Melenbrink, Pratyusha Das, and Barry C. Thompson, ACS Applied Polymer Materials, no. 3, 2021, doi: 10.1021/acsapm.1c00213. keywords: {ternary organic solar cells;conjugated polymers;conjugationbreak spacer;semirandom polymers;elastic polymers}