daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Study on Electrodeposition Preparation and Corrosion Resistance of Ni-Co-Ce Composite Coatings AITranslate

College of Materials and Metallurgy,University of Science and Technology Liaoning;College of Materials and Metallurgy,University of Science and Technology Liaoning;College of Materials and Metallurgy,University of Science and Technology Liaoning;College of Materials and Metallurgy,University of Science and Technology Liaoning;College of Materials and Metallurgy,University of Science and Technology Liaoning;College of Materials and Metallurgy,University of Science and Technology Liaoning
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites Download PDF

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

Ni-Co alloy coatings have good corrosion resistance and are mostly used for metal corrosion protection.The addition of Ce to the alloy coatings can refine the crystal grains and improve the microstructure densification and corrosion resistance of the alloy coatings.Using marine steel EH40 as the substrate,Ni-Co-Ce alloy coatings were prepared on its surface by composite electrodeposition process.The corrosion resistance of the alloy coatings prepared under different process conditions was tested through tests of potentiodynamic polarization curve and electrochemical impedance spectroscopy in a 3.5%NaCl solution.The surface morphology and phase composition of the coatings were investigated by scanning electron microscope and X-ray diffractometer.The results show that the optimal electrodeposition conditions of the coatings are a cerous sulfate concentration of 0.6 g/L,a current density of 0.04 A/cm2,and an electrodeposition temperature of 50℃.Under these conditions,the prepared coating possesses smooth surface,with the lowest self-corrosion current and self-corrosion potential(absolute value)of 3.6945×10-6A/cm2 and-0.534 V,respectively.In addition,the above coating exhibits the maximum charge transfer impedance of 889.81Ω·cm2,having the best corrosion resistance.

KeyWords AITranslate

marine steel Ni-Co-C ecoating electrodeposition electrochemical analysis corrosion resistance

1刘香琳,王一雍,金辉,梁智鹏,周新宇.超声波辅助电沉积Ni-Co-Y2O3复合镀层的电化学研究[J].电镀与环保,2019,39(6):13-16. 被引量:3

2郭昭,齐海东,卢帅,杨海丽.Ni-Co/MoS2复合电沉积行为及析氢性能研究[J].有色金属工程,2019,9(8):16-22. 被引量:4

3马军.电沉积法制备纳米晶Ni-Co合金镀层[J].电镀与精饰,2019,41(6):1-4. 被引量:7

4郭忠诚,朱晓云,徐瑞东,薛方勤.电沉积RE-Ni-W-P-SiC复合镀层的腐蚀行为研究[J].材料保护,2003,36(7):38-41. 被引量:3

5路世盛,周健松,王凌倩,梁军.球墨铸铁表面激光熔覆Ni-Co复合涂层的耐腐蚀及高温摩擦学性能[J].中国表面工程,2022,35(3):122-131. 被引量:5

6席艳君,刘泳俊,卢金斌,王志新.电沉积Fe-Cr-Ni合金的电化学腐蚀行为[J].腐蚀与防护,2008,29(7):375-377. 被引量:3

7游福仁,王强,李文文,史鹏忠,张建旗.电沉积Ni-Co-Cr合金镀层的电化学性能[J].内蒙古科技大学学报,2014,33(3):249-253. 被引量:1

8李敏,张胜健,曹秋菊.桐油覆膜Ni-Co-SiO2纳米复合涂层的制备及防腐性能研究[J].电镀与精饰,2023,45(1):8-15. 被引量:3

9叶淼,何欣,王海涛,秦湘阁.电沉积制备Ni-Co合金镀层及耐蚀性能研究[J].广东化工,2021,48(16):63-64. 被引量:1

10彭文山,侯健,丁康康,郭为民,邱日,许立坤.深海环境中304不锈钢腐蚀行为研究[J].中国腐蚀与防护学报,2019,0(2):145-151. 被引量:13

1禹露,许婄鑫,罗志翔.A356铝合金的表面改性与耐磨及耐蚀性能研究[J].电镀与精饰,2024,46(4):29-37.

2朱榕,吴爽,陈博,刘玉龙,朱诚意.连铸结晶器镍−钴−氧化铈复合镀液优化及镀层性能[J].电镀与涂饰,2023,42(23):1-7.

3张宏强,李彦勤,刘建兴,胡启源,周建荣.铸轧坯料生产的铝带材耐蚀性能研究[J].轻合金加工技术,2024,52(1):28-31.

4张政,徐鹏,孟宇龙,卢中玉,邹家睿.基于Co-CEM的柔性车间调度优化算法[J].哈尔滨工程大学学报,2024,45(3):480-488.

5马东帅,闫二虎,白金旺,王豪,张硕,王艺豪,李唐卫,郭智洁,周子锐,邹勇进,孙立贤.V-Ti-Fe三元合金显微组织、氢传输行为及耐蚀性能研究[J].材料导报,2024,38(8):192-198.

6罗彩云,王伟强,史淑艳,杨帅康,许雅南,朱明,刘慧颖.可降解Fe@Fe-Zn骨组织工程支架体外生物相容性研究[J].表面技术,2024,53(8):163-172.

7高博雅,谭春明,李长虹,杨若湫,王建峰,李平兰.鲟鳇鱼子酱营养成分分析及品质评价[J].肉类研究,2024,38(2):28-34.

Basic Information:

DOI:

Chinese Library Classification Number:TG174.44[金属学及工艺—金属表面处理]

Citation Information:

Ni-Co alloy coatings have good corrosion resistance and are mostly used for metal corrosion protection.The addition of Ce to the alloy coatings can refine the crystal grains and improve the microstructure densification and corrosion resistance of the alloy coatings.Using marine steel EH40 as the substrate,Ni-Co-Ce alloy coatings were prepared on its surface by composite electrodeposition process.The corrosion resistance of the alloy coatings prepared under different process conditions was tested through tests of potentiodynamic polarization curve and electrochemical impedance spectroscopy in a 3.5%NaCl solution.The surface morphology and phase composition of the coatings were investigated by scanning electron microscope and X-ray diffractometer.The results show that the optimal electrodeposition conditions of the coatings are a cerous sulfate concentration of 0.6 g/L,a current density of 0.04 A/cm2,and an electrodeposition temperature of 50℃.Under these conditions,the prepared coating possesses smooth surface,with the lowest self-corrosion current and self-corrosion potential(absolute value)of 3.6945×10-6A/cm2 and-0.534 V,respectively.In addition,the above coating exhibits the maximum charge transfer impedance of 889.81Ω·cm2,having the best corrosion resistance.

quote

GB/T 7714-2015 [1] HU Yue, LIANG Zhi-peng, LI Ji-dong, et al. Study on Electrodeposition Preparation and Corrosion Resistance of Ni-Co-Ce Composite Coatings[J]. Rare Metals and Cemented Carbides, 2024(2): 38-44.
MLA [1] HU Yue, et al., "Study on Electrodeposition Preparation and Corrosion Resistance of Ni-Co-Ce Composite Coatings." Rare Metals and Cemented Carbides, no. 2, 2024, pp. 38-44.
APA [1] HU Yue, LIANG Zhi-peng, LI Ji-dong, LU Jin-lin, CHEN Dong-xu, & JIN Sen-hu. (2024). Study on Electrodeposition Preparation and Corrosion Resistance of Ni-Co-Ce Composite Coatings. Rare Metals and Cemented Carbides(2), 38-44.
IEEE [1] HU Yue, LIANG Zhi-peng, LI Ji-dong, LU Jin-lin, CHEN Dong-xu, and JIN Sen-hu, "Study on Electrodeposition Preparation and Corrosion Resistance of Ni-Co-Ce Composite Coatings," Rare Metals and Cemented Carbides, no. 2, pp. 38-44, 2024. keywords: {marine steel;Ni-Co-C ecoating;electrodeposition;electrochemical analysis;corrosion resistance}