daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Preparation of Continuous Gradient Porous Tungsten Blank AITranslate

National Key Laboratory of Powder Metallurgy of Central South University;National Key Laboratory of Powder Metallurgy of Central South University;National Key Laboratory of Powder Metallurgy of Central South University;National Key Laboratory of Powder Metallurgy of Central South University;National Key Laboratory of Powder Metallurgy of Central South University;National Key Laboratory of Powder Metallurgy of Central South University
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

Porous tungsten blank with continuous porosity gradient was prepared via oxidation-gasification reaction between water vapor and W powder particles. The effects were investigated of W powder granularity composition,reaction temperature and time on porosity gradient of the tungsten blank. The microstructure of the sample was observed by metallographic microscope, and the volume fraction of its pores was measured by image analysis software. The results show that porous tungsten blank with continuous porosity gradient can be obtained with oxidation-gasification method, and its porosity decreases gradually from surface to core. Fine tungsten powder is very beneficial to pore construction, and the tungsten blank containing more fine powder has higher porosity and porosity gradient. Higher reaction temperature also results in higher porosity and porosity gradient of the tungsten blank. The longer the reaction time, the higher the porosity and the larger the porosity gradient area of the tungsten blank. Furthermore, surface pores have larger size than core pores of the sample.

KeyWords AITranslate

porous tungsten blank continuous porosity gradient oxidation-gasification W powder granularity composition process parameter

1罗来马,谭晓月,罗广南,昝祥,朱晓勇,吴玉程.第一壁材料W/Cu界面设计与制备研究现状[J].核聚变与等离子体物理,2014,34(4):340-347. 被引量:7

2郭垚峰,范景莲,蒋冬福,刘涛.细晶W-Cu复合FGM制备及其显微组织特征[J].中南大学学报:自然科学版,2014,45(11):3762-3768. 被引量:1

3周张健,葛昌纯,李江涛.熔渗-焊接法制备W/Cu功能梯度材料的研究[J].金属学报,2000,36(6):655-658. 被引量:25

4周张健,葛昌纯,李江涛.热压法制备W/Cu功能梯度材料[J].材料科学与工艺,2000,8(1):52-54. 被引量:26

5凌云汉,周张键,李江涛,杨大正,葛昌纯.超高压梯度烧结法制备W/Cu功能梯度材料[J].中国有色金属学报,2001,11(4):576-581. 被引量:30

6刘彬彬,谢建新.多坯料挤压法制备近全致密W-Cu梯度热沉材料[J].粉末冶金材料科学与工程,2014,19(6):897-902. 被引量:3

7种法力,陈俊凌,李建刚.VPS-EBW法制备W/Cu功能梯度材料及热负荷实验研究[J].稀有金属材料与工程,2006,35(9):1509-1512. 被引量:11

8孙祥鸣,宋月鹏,高东升,李江涛,陈义祥,许令峰,郭晶,郭世斌,赵培.CuO-Al铝热体系超重力熔铸W-Cu梯度复合材料[J].复合材料学报,2013,30(4):136-141. 被引量:6

1林基辉,张腾,温亚辉,刘晨雨,范文博,薛飞.电工钨铜复合材料的研究进展[J].兵器材料科学与工程,2020,43(5):136-140. 被引量:1

1钟远辉.钨铜合金材料的研究进展及应用[J].冶金与材料,2023,43(1):151-153.

1CaMgSi热电材料[J].金属功能材料,2017,24(3):24-24.

2黄元春,成再春,肖政兵,许天成,王艳玲.退火温度对冷轧态5754铝合金板材组织与性能的影响[J].粉末冶金材料科学与工程,2017,22(3):360-365. 被引量:8

Basic Information:

DOI:

Chinese Library Classification Number:TG146.411[金属学及工艺—金属材料]

Citation Information:

Porous tungsten blank with continuous porosity gradient was prepared via oxidation-gasification reaction between water vapor and W powder particles. The effects were investigated of W powder granularity composition,reaction temperature and time on porosity gradient of the tungsten blank. The microstructure of the sample was observed by metallographic microscope, and the volume fraction of its pores was measured by image analysis software. The results show that porous tungsten blank with continuous porosity gradient can be obtained with oxidation-gasification method, and its porosity decreases gradually from surface to core. Fine tungsten powder is very beneficial to pore construction, and the tungsten blank containing more fine powder has higher porosity and porosity gradient. Higher reaction temperature also results in higher porosity and porosity gradient of the tungsten blank. The longer the reaction time, the higher the porosity and the larger the porosity gradient area of the tungsten blank. Furthermore, surface pores have larger size than core pores of the sample.

quote

GB/T 7714-2015 [1] XIAO Bin, CAO Shun-hua, LI Shi-kang, et al. Preparation of Continuous Gradient Porous Tungsten Blank[J]. Rare Metals and Cemented Carbides, 2017(3): 15-19.
MLA [1] XIAO Bin, et al., "Preparation of Continuous Gradient Porous Tungsten Blank." Rare Metals and Cemented Carbides, no. 3, 2017, pp. 15-19.
APA [1] XIAO Bin, CAO Shun-hua, LI Shi-kang, XU Huan, CHEN Bing-huang, & MA Xin-xing. (2017). Preparation of Continuous Gradient Porous Tungsten Blank. Rare Metals and Cemented Carbides(3), 15-19.
IEEE [1] XIAO Bin, CAO Shun-hua, LI Shi-kang, XU Huan, CHEN Bing-huang, and MA Xin-xing, "Preparation of Continuous Gradient Porous Tungsten Blank," Rare Metals and Cemented Carbides, no. 3, pp. 15-19, 2017. keywords: {porous tungsten blank;continuous porosity gradient;oxidation-gasification;W powder granularity composition;process parameter}