Preparation and Characterization of 93W-Ni-Cu/ABS Composite Filaments for FDM Process AITranslate
Abstract AITranslate
93W-Ni-Cu/ABS composite filaments with a diameter of about 1.70 mm were prepared by using industrial tungsten powder,nickel powder,copper powder and ABS powder as raw materials.Then,using the filaments as raw material,the green billets with complex structure were printed by FDM(fused deposition molding) technology.The properties of 93W-Ni-Cu/ABS composite filaments prepared under different conditions and the effects of solid volume fraction on the compactness and mechanical properties of green billets were studied.The results show that the addition of surfactants can enhance the cohesion between ABS and 93W-Ni-Cu particles and reduce the porosity of the composites.With the increase of solid volume fraction,the tensile fracture load and elongation at break of the filaments gradually decrease.The highest solid volume fraction of the composite filaments is 45%.When the solid volume fraction of the green billets is 40%,the elastic modulus of the composite filaments reaches the maximum value of 1 390 MPa,which is 55.3% higher than that of ABS.
KeyWords AITranslate
1王娜,贺毅强.金属基粉末制备技术的研究进展及发展趋势[J].热加工工艺,2013,42(4):86-88. 被引量：9
2李鹏.高密度钨合金研究现状与发展趋势[J].稀有金属与硬质合金,2004,32(3):32-35. 被引量：9
3范景莲,龚星,祁美贵,刘涛,黄伯云.细晶钨合金的制备与动态失效行为[J].中国有色金属学报,2009,19(12):2143-2148. 被引量：7
4王松,谢明.高密度钨合金的研究现状与发展趋势[J].稀有金属材料与工程,2012,41(S2):145-148. 被引量：22
5王松,陈宏燕,胡洁琼,谢明,杨有才,张吉明,陈永泰,刘满门,崔浩.高比重钨合金的研究现状[J].贵金属,2011,32(3):85-88. 被引量：14
6戴冬华,顾冬冬,李雅莉,张国全,贾清波,沈以赴.选区激光熔化W-Cu复合体系熔池熔体运动行为的数值模拟[J].中国激光,2013,40(11):74-82. 被引量：24
7范景莲,黄伯云,曲选辉,李益民.W-Ni-Fe系高密度合金的研究与发展[J].稀有金属与硬质合金,1998,26(4):47-51. 被引量：6
8向道平,丁雷.合金元素或氧化物强化W-Ni-Fe高密度合金的研究进展[J].中国有色金属学报,2013,23(6):1549-1559. 被引量：7
9马红磊,胡更开,谭成文,于晓东,白延强,刘炳坤,祝郁.93W和97W钨合金破坏机制研究(英文)[J].稀有金属材料与工程,2010,39(8):1344-1347. 被引量：5
10张雪辉,李晓闲,章标,王成,朱太恒.稀土改性高密度W-Ni-Fe合金的研究现状及发展趋势[J].功能材料,2016,47(B06):66-71. 被引量：5
1任蕊,曹晨茜,皇甫慧君,齐永红,蒋靖波,周晓慧,陈国珍.基于高分子材料3D打印成型技术的研究[J].应用化工,2020,49(9):2370-2376. 被引量：12
2李宁.基于高分子材料3D打印成型技术的研究[J].当代化工研究,2021(12):161-162. 被引量：3
3张仕颖,夏国峰,郝向阳,陈伟,张怡,杜明见,左都全.FDM型金属3D打印研究现状与展望[J].特种铸造及有色合金,2023,43(2):163-168.
1郜一帆.高分子材料成型及其控制研究[J].价值工程,2020,39(31):179-180. 被引量：1
2张秋雨,李琳琳,吴广东,赵彦喆.熔融沉积3D打印机机械机构CAE分析[J].吉林工程技术师范学院学报,2020,36(11):123-126.
3刘智,赵永强.3D打印技术设备的现状与发展[J].锻压装备与制造技术,2020,55(6):7-13. 被引量：9
4周艳丽.计算机技术在3D打印材料成型过程中的运用[J].造纸装备及材料,2020,49(5):88-90. 被引量：1
5孙杭,赵建平.3D打印在社会发展中的应用[J].科技风,2021(13):9-11. 被引量：1
6周虎.高聚物的新型3D打印材料开发进展[J].信息记录材料,2021,22(8):30-31.
7刘振盈,李磊,杨玮婧,张得栋.选择性激光烧结成型过程的影响因素[J].塑料工业,2021,49(11):20-24. 被引量：6
8陈思思,潘琪,苏萌,宋延林.印刷法制备功能芯片的研究进展[J].包装工程,2022,43(3):189-201.
9王富利,夏凯丽,龚宇,刘秋华,刘坤,龚含,崔景强.UV单组分光引发剂对光固化涂层牢固度的影响[J].科技创新与应用,2022,12(11):91-94.
10徐舒.多元应用 多维展示——3D技术应用于文物领域的措施探讨[J].文物鉴定与鉴赏,2022(7):45-48. 被引量：1
1曹昭平,刘静.基于FDM 3D打印支撑添加的一体化教学[J].模具工业,2019,45(10):76-79. 被引量：1
2申玉芳,沈毅,张昂.氧化铝基复相材料浓悬浮液[J].河北理工大学学报：自然科学版,2001,27(z1):72-74.
3魏祥义,王吉.探究3D打印技术的原理及其应用[J].科技风,2019,0(19):79-79. 被引量：4
4同艳维,李娜丽,邓林.Mo替代Ni对TiC基金属陶瓷组织结构和性能的影响[J].稀有金属与硬质合金,2019,47(5):25-28.
5杨高宏.3DP230型号3D打印机的结构分析[J].南方农机,2019,50(20):141-142. 被引量：1
6孙瑶,丁茜,原福松,张磊,孙玉春,谢秋菲.一种牙支持式椅旁3D打印种植手术导板的临床应用初探[J].实用口腔医学杂志,2019,35(5):711-716. 被引量：8
7张峰.关于工业级无人机应用市场分析[J].大众投资指南,2019,0(15):228-229.
8林松盛,黄儒明,苏一凡,石倩,韦春贝,代明江.CrN膜层结构对其性能的影响[J].材料研究与应用,2019,13(3):195-201. 被引量：4
9李青云,郭纪斌,梁旭坤.3D打印产品后处理工艺在专业教学中的应用探索[J].湖北农机化,2019(20):69-70. 被引量：2
10L.Mason,M.C.Leu.The Effect of Cell Size and Surface Roughness on the Compressive Properties of ABS Lattice Structures Fabricated by Fused Deposition Modeling[J].机械工程与自动化：英文版,2019,9(5):139-151.
Basic Information:
DOI：
Chinese Library Classification Number:TE333[石油与天然气工程—油气田开发工程]
Citation Information:
93W-Ni-Cu/ABS composite filaments with a diameter of about 1.70 mm were prepared by using industrial tungsten powder,nickel powder,copper powder and ABS powder as raw materials.Then,using the filaments as raw material,the green billets with complex structure were printed by FDM(fused deposition molding) technology.The properties of 93W-Ni-Cu/ABS composite filaments prepared under different conditions and the effects of solid volume fraction on the compactness and mechanical properties of green billets were studied.The results show that the addition of surfactants can enhance the cohesion between ABS and 93W-Ni-Cu particles and reduce the porosity of the composites.With the increase of solid volume fraction,the tensile fracture load and elongation at break of the filaments gradually decrease.The highest solid volume fraction of the composite filaments is 45%.When the solid volume fraction of the green billets is 40%,the elastic modulus of the composite filaments reaches the maximum value of 1 390 MPa,which is 55.3% higher than that of ABS.
quote
| GB/T 7714-2015 | [1] FENG Jian, ZHANG Jing, LI Bang-yi, et al. Preparation and Characterization of 93W-Ni-Cu/ABS Composite Filaments for FDM Process[J]. Rare Metals and Cemented Carbides, 2019(5): 19-24. |
| MLA | [1] FENG Jian, et al., "Preparation and Characterization of 93W-Ni-Cu/ABS Composite Filaments for FDM Process." Rare Metals and Cemented Carbides, no. 5, 2019, pp. 19-24. |
| APA | [1] FENG Jian, ZHANG Jing, LI Bang-yi, WU Fang, HE Xin, ZHU Xun-qi, SHAO Jia-jun, & ZHU Yu-bin. (2019). Preparation and Characterization of 93W-Ni-Cu/ABS Composite Filaments for FDM Process. Rare Metals and Cemented Carbides(5), 19-24. |
| IEEE | [1] FENG Jian, ZHANG Jing, LI Bang-yi, WU Fang, HE Xin, ZHU Xun-qi, SHAO Jia-jun, and ZHU Yu-bin, "Preparation and Characterization of 93W-Ni-Cu/ABS Composite Filaments for FDM Process," Rare Metals and Cemented Carbides, no. 5, pp. 19-24, 2019. keywords: {93W-Ni-Cu/ABS composite filament;fused deposition molding;3D printing;solid volume fraction;tensile fracture property;density} |