Research on Iron Plating and Boronizing Behavior of Nitrided 38CrMoAl Steel AITranslate
Abstract AITranslate
Taking 38 CrMoAl steel as the research object,its surface was treated with nitriding,iron plating and boronizing,respectively.The nitrided layer,iron-plated layer and boronized layer were characterized and analyzed by X-ray diffractometer,optical microscope and microhardness tester.The results show that the boronized layer with thickness of 100μm can be obtained by the method of combining iron plating and boronizing,and it is composed of Fe2B single phase,which is wedged into the matrix in the shape of needle teeth and firmly combined with the matrix.The surface hardness of nitrided 38 CrMoAl steel is significantly improved to 1700 HV after iron plating and boronizing treatment,which is much higher than that of 38 CrMoAl steel with ordinary nitriding treatment,thus achieving the purpose of improving the surface performance of the repaired material.
KeyWords AITranslate
1冯治国,郑纪豹,刘静.38CrMoAl钢负压感应快速渗氮工艺及性能[J].材料热处理学报,2017,38(8):128-133. 被引量：6
2王晨晨,许文花,肖桂勇,吕宇鹏.38CrMoAl钢介稳态气体渗氮的组织与硬度[J].金属热处理,2016,41(7):41-45. 被引量：7
3周上祺,侯琼,任勤.38CrMoAl钢离子渗氮微观结构的研究[J].金属热处理,2002,27(10):10-12. 被引量：17
4李双喜,孙启锋,王鑫,李宝奎,黄红涛.38CrMoAl钢表面离子渗氮层剥落原因分析[J].金属热处理,2019,44(2):223-226. 被引量：7
5刘振民.温度对38CrMoAl钢离子氮化渗层性能的影响[J].热处理技术与装备,2016,37(6):6-9. 被引量：7
6陈方生,王成国,刘玉先,庞国华,高致远.稀土对38CrMoAl钢离子渗氮层结构和性能的影响[J].钢铁,2000,35(8):48-50. 被引量：13
7张兴凯,韩伟,郑玉峰,范德增.纯镁材表面化学镀铁[J].材料保护,2014,47(4):5-7. 被引量：2
8刘洪涛,顾卡丽,李健,杜三明.低温镀铁层的微观结构和摩擦学性能[J].材料保护,2004,37(6):7-8. 被引量：11
9孙凯,杨森,安宁.低温镀铁技术的发展与应用[J].电镀与环保,2011,31(5):1-3. 被引量：8
10吴开阳,崔霞,欧阳德来,周贤良.渗硼时间对45钢固体粉末渗硼渗层组织与性能的影响[J].热加工工艺,2011,40(24):182-184. 被引量：6
1李海涛,韩贵生,戴姣燕,徐金富.45钢激光硼氮合金化层制备及性能研究[J].材料保护,2022,55(4):98-103. 被引量：1
1王洪金,孙顺平,潘强,李小平,于赟.MoSi_(2)涂层制备工艺与腐蚀性能研究[J].山东化工,2023,52(1):37-39.
11985年总目录[J].热处理技术与装备,1985,0(6):64-65.
2李金平,王建锋,王攀.不同渗硼处理工艺下H13钢的组织及抗熔损性能[J].机械工程材料,2020(S02):29-33. 被引量：3
Basic Information:
DOI：
Chinese Library Classification Number:TG174.4[金属学及工艺—金属表面处理]
Citation Information:
Taking 38 CrMoAl steel as the research object,its surface was treated with nitriding,iron plating and boronizing,respectively.The nitrided layer,iron-plated layer and boronized layer were characterized and analyzed by X-ray diffractometer,optical microscope and microhardness tester.The results show that the boronized layer with thickness of 100μm can be obtained by the method of combining iron plating and boronizing,and it is composed of Fe2B single phase,which is wedged into the matrix in the shape of needle teeth and firmly combined with the matrix.The surface hardness of nitrided 38 CrMoAl steel is significantly improved to 1700 HV after iron plating and boronizing treatment,which is much higher than that of 38 CrMoAl steel with ordinary nitriding treatment,thus achieving the purpose of improving the surface performance of the repaired material.
quote
| GB/T 7714-2015 | [1] FU Yu-zhu, WANG Ge, TONG Wei-ping. Research on Iron Plating and Boronizing Behavior of Nitrided 38CrMoAl Steel[J]. Rare Metals and Cemented Carbides, 2021(1): 83-87. |
| MLA | [1] FU Yu-zhu, et al., "Research on Iron Plating and Boronizing Behavior of Nitrided 38CrMoAl Steel." Rare Metals and Cemented Carbides, no. 1, 2021, pp. 83-87. |
| APA | [1] FU Yu-zhu, WANG Ge, & TONG Wei-ping. (2021). Research on Iron Plating and Boronizing Behavior of Nitrided 38CrMoAl Steel. Rare Metals and Cemented Carbides(1), 83-87. |
| IEEE | [1] FU Yu-zhu, WANG Ge, and TONG Wei-ping, "Research on Iron Plating and Boronizing Behavior of Nitrided 38CrMoAl Steel," Rare Metals and Cemented Carbides, no. 1, pp. 83-87, 2021. keywords: {38CrMoAl steel;iron plating;boronizing;nitriding;repaired material;hardness} |