Three-dimensional Finite Element Simulation and Application for Titanium Alloy Bar Rolling with Flat Triangle-Round Pass System AITranslate
Abstract AITranslate
Titanium alloy （TC4） bar rolling process with three-roller Y-typed rolling mill and flat triangle round pass system was simulated by the finite element software of ANSYS/LS-DYNA. The rolling param- eters including metal flow, stress and strain and rolling force were studied. The simulation results show that it is feasible to produce titanium alloy bar with flat triangle-round pass system,providing an analytical reference for rolling program and pass design of new products.
KeyWords AITranslate
1曹喜发.KOCKS棒线材轧机及轧制理论（一）[J].钢铁厂设计,1992(2):28-36. 被引量：4
2曹喜发.KOCKS棒线材轧机及轧制理论（二）[J].钢铁厂设计,1992(3):40-60. 被引量：5
3潘露,帅美荣,黄庆学.孔型设计对棒材连轧稳定性的影响[J].太原科技大学学报,2012,33(2):123-127. 被引量：6
4帅美荣.钛合金棒材成形过程的有限元分析与试验研究[J].太原科技大学学报,2008,29(5):380-383. 被引量：10
5胡海萍,孙吉先,朱为昌,刘雅政.Y型三辊轧制变形过程有限元模拟与实验[J].北京科技大学学报,1999,21(4):372-375. 被引量：18
1王悦,江莉莉.基于DEFORM-3D的TC17钛合金棒材三辊螺旋轧制过程模拟及其应用[J].稀有金属与硬质合金,2016,44(5):70-73. 被引量：3
2胡明,董利民,张志强,雷晓飞,杨锐,沙玉辉.Ti-6Al-4V合金多道次热轧过程有限元模拟与实验[J].稀有金属材料与工程,2020,49(3):956-961. 被引量：3
1袁思波,程军,韩建业,于振涛,皇甫强,牛金龙,余森.一种新型钛合金无缝管轧制过程中应力应变有限元模拟分析[J].广东化工,2017,44(8):62-64. 被引量：2
2苏春民,范茂艳,钟仁智,徐文帅,黄常勋,葛波,邹吉猛.有限元模拟验证TC17钛合金前轴颈精密成形过程中变形和微观结构的关系[J].锻压技术,2021,46(9):224-229.
3常彬彬,帅美荣,刘鑫.棒材三辊孔型自由宽展流动模型[J].锻压技术,2021,46(11):207-214. 被引量：3
4武小娟,杨川,张志强,孟凡玲,柏春光,李萍.TA15钛合金不等厚L型材热轧有限元模拟[J].钛工业进展,2022,39(1):1-5. 被引量：4
5孙伟,张淑婷,杜开平,欧阳佩旋,杨谨赫.基于有限元法冶金冷轧辊表面替代电镀铬涂层的设计与研究[J].材料导报,2022,36(7):116-121.
6李潮,双远华,陈晨,周研,王琛,穆佳浩,张坚.钛合金无缝管热连轧温度场模拟[J].稀有金属材料与工程,2023,52(3):791-797.
1李玉峰.钨钼棒材轧机调研的综述[J].中国钼业,2001,25(4):32-33. 被引量：1
2潘克云,王先进,秦国庆.圆孔型系统张力减径后钢管横向壁厚不均匀性的模拟[J].钢铁研究学报,2000,12(2):29-32. 被引量：9
3李之恒,郭拉凤,李彩霞,陈攀宇.AZ31镁合金棒材三辊热轧数值模拟与工艺研究[J].轻合金加工技术,2015,43(1):41-45.
4任相友,董芳,杨桦,刘海付.热轧机轧制方案探讨[J].黑龙江科技信息,2003(2):83-83.
5李文彬,官军.浅析高速线材轧制的稳定性[J].锻压技术,2005,30(4):18-21.
6沈贵祥.焊接热裂纹产生原因及防止措施[J].中国化工贸易,2013,5(6):103-103. 被引量：2
7潘露,帅美荣,王建军,黄庆学.三辊Y型轧机计算机辅助孔型设计系统的开发及应用[J].兵器材料科学与工程,2013,36(4):75-77.
8顾元国.铝合金半固态浆料的蛇形浇注[J].铸造技术,2014,35(1):135-137.
9潘露,帅美荣,黄庆学.孔型设计对棒材连轧稳定性的影响[J].太原科技大学学报,2012,33(2):123-127. 被引量：6
10贺立红,余驰斌,周家林,赵刚.基于人工神经网络的棒材连轧宽展模型的建立[J].武汉科技大学学报,2001,24(1):8-10. 被引量：4
Basic Information:
DOI：
Chinese Library Classification Number:TG332[金属学及工艺—金属压力加工]
Citation Information:
Titanium alloy （TC4） bar rolling process with three-roller Y-typed rolling mill and flat triangle round pass system was simulated by the finite element software of ANSYS/LS-DYNA. The rolling param- eters including metal flow, stress and strain and rolling force were studied. The simulation results show that it is feasible to produce titanium alloy bar with flat triangle-round pass system,providing an analytical reference for rolling program and pass design of new products.
quote
| GB/T 7714-2015 | [1] WANG Ya-qin, LIU Xin-yu, PAN Lu. Three-dimensional Finite Element Simulation and Application for Titanium Alloy Bar Rolling with Flat Triangle-Round Pass System[J]. Rare Metals and Cemented Carbides, 2014(6): 38-41. |
| MLA | [1] WANG Ya-qin, et al., "Three-dimensional Finite Element Simulation and Application for Titanium Alloy Bar Rolling with Flat Triangle-Round Pass System." Rare Metals and Cemented Carbides, no. 6, 2014, pp. 38-41. |
| APA | [1] WANG Ya-qin, LIU Xin-yu, & PAN Lu. (2014). Three-dimensional Finite Element Simulation and Application for Titanium Alloy Bar Rolling with Flat Triangle-Round Pass System. Rare Metals and Cemented Carbides(6), 38-41. |
| IEEE | [1] WANG Ya-qin, LIU Xin-yu, and PAN Lu, "Three-dimensional Finite Element Simulation and Application for Titanium Alloy Bar Rolling with Flat Triangle-Round Pass System," Rare Metals and Cemented Carbides, no. 6, pp. 38-41, 2014. keywords: {titanium alloy bar rolling;finite element simulation;three-roller Y-typed rolling mill;pass de-sign;flat triangle-round pass system} |