daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Effects of Withdrawing Rate on the Growth Orientation of Directionally Solidified Co-Al-W Superalloys AITranslate

School of Materials Science and Engineering, Northwestern University of Technology;School of Materials Science and Engineering, Northwestern University of Technology
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

Co-9 Al-9 W-0.1 Balloy was directionally solidified at different withdrawing rate,and its solidified microstructure was observed and the grain growth orientation was investigated by electron backscatter diffraction.With the withdrawing rate of 20 mm/h and 60 mm/h,the solid-liquid interface fronts are plane and cellular,respectively,and the growth orientation is both close to the〈101〉direction.With withdrawing rate increasing,the solid-liquid interface front changes into dendrites.When the withdrawing rate is 180 mm/h,the growth orientation is〈013〉direction.With the withdrawing rate of 360 mm/h,the grain growth orientation deviated from 〈101〉by about 30°.Co-9 Al-9 Walloy has a preferred orientation of〈001〉after a period of competition growth during directional solidification at 180 mm/h withdrawing rate.Borides can strengthen grain boundaries and the absence of borides results in the poorer creep strength of Co-9 Al-9 W alloy,compared with Co-9 Al-9 W-0.1 Balloy directionally solidified at the same withdrawing rate.Co-9 Al-9 W-0.1 B alloy directionally solidified at 180 mm/h withdrawing rate has columnar grains and higher creep strength than Co-9 Al-9 W-0.1 Balloy with equiaxed grains.

KeyWords AITranslate

superalloy Co- 9 Al- 9W-0. 1B directional solidification preferred orientation withdrawing rate microstructure electron backscatter diffraction

1张卫国,刘林,赵新宝,屈敏,余竹焕,傅恒志.定向凝固高温合金的研究进展[J].铸造,2009,58(1):1-6. 被引量:46

2刘刚,刘林,赵新宝,张卫国,金涛,张军,傅恒志.一种镍基单晶高温合金的高温度梯度定向凝固组织及枝晶偏析[J].金属学报,2010,46(1):77-83. 被引量:23

3于靖,许庆彦,李嘉荣,袁海龙,刘世忠,柳百成.镍基高温合金多叶片定向凝固过程数值模拟[J].金属学报,2007,43(10):1113-1120. 被引量:19

1任鑫明,马北越,于景坤,刘国齐,李红霞.钛-陶复合材料的研究进展[J].耐火材料,2018,52(1):68-74. 被引量:2

2黎静芳.师范生自主生长取向课堂模式探究[J].成才,2017,0(11):23-24.

3任晓剑,樊自拴.硼化物金属陶瓷涂层的研究进展[J].材料保护,2018,51(1):90-95. 被引量:4

4徐仰涛,夏荣里,娄德超.镍含量对Co-8.8Al-9.8W基合金时效组织演变与γ′相溶解行为的影响[J].稀有金属材料与工程,2017,46(8):2288-2293. 被引量:2

5马颖,郝远,阎峰云,刘洪军.锌铝合金热型连铸的工艺方法[J].中国有色金属学报,2001,11(z1):56-62. 被引量:8

6姚红岩,刘浦东,施润和,张超.基于高分辨率遥感影像的湿地互花米草-芦苇混合交错带提取方法[J].地球信息科学学报,2017,19(10):1375-1381. 被引量:8

7余建波,侯渊,张超,杨志彬,王江,任忠鸣.静磁场对新型Co-Al-W基高温合金定向凝固组织的影响[J].金属学报,2017,53(12):1620-1626. 被引量:3

8昆明冶金研究院一省应用基础研究计划重大项目通过验收[J].重钢技术,2017,60(2):6-6.

9杨槐,闫林霞,田森林,张月超,李英杰,宋玉新.类水滑石衍生氧化物催化水解HCN及其热力学分析[J].化学工程,2017,45(11):45-49.

10刘建锋,袁子洲,路世盛,张香云,陈文斌.合金化对Zr-Co-Al非晶合金耐腐蚀性能的影响[J].功能材料,2017,48(12):12152-12155.

Basic Information:

DOI:

Chinese Library Classification Number:TG132.32[一般工业技术—材料科学与工程]

Citation Information:

Co-9 Al-9 W-0.1 Balloy was directionally solidified at different withdrawing rate,and its solidified microstructure was observed and the grain growth orientation was investigated by electron backscatter diffraction.With the withdrawing rate of 20 mm/h and 60 mm/h,the solid-liquid interface fronts are plane and cellular,respectively,and the growth orientation is both close to the〈101〉direction.With withdrawing rate increasing,the solid-liquid interface front changes into dendrites.When the withdrawing rate is 180 mm/h,the growth orientation is〈013〉direction.With the withdrawing rate of 360 mm/h,the grain growth orientation deviated from 〈101〉by about 30°.Co-9 Al-9 Walloy has a preferred orientation of〈001〉after a period of competition growth during directional solidification at 180 mm/h withdrawing rate.Borides can strengthen grain boundaries and the absence of borides results in the poorer creep strength of Co-9 Al-9 W alloy,compared with Co-9 Al-9 W-0.1 Balloy directionally solidified at the same withdrawing rate.Co-9 Al-9 W-0.1 B alloy directionally solidified at 180 mm/h withdrawing rate has columnar grains and higher creep strength than Co-9 Al-9 W-0.1 Balloy with equiaxed grains.

quote

GB/T 7714-2015 [1] LI Yu-zhi, YAO Ze-kun. Effects of Withdrawing Rate on the Growth Orientation of Directionally Solidified Co-Al-W Superalloys[J]. Rare Metals and Cemented Carbides, 2018(1): 21-26.
MLA [1] LI Yu-zhi, and YAO Ze-kun. "Effects of Withdrawing Rate on the Growth Orientation of Directionally Solidified Co-Al-W Superalloys." Rare Metals and Cemented Carbides, no. 1, 2018, pp. 21-26.
APA [1] LI Yu-zhi, & YAO Ze-kun. (2018). Effects of Withdrawing Rate on the Growth Orientation of Directionally Solidified Co-Al-W Superalloys. Rare Metals and Cemented Carbides(1), 21-26.
IEEE [1] LI Yu-zhi and YAO Ze-kun, "Effects of Withdrawing Rate on the Growth Orientation of Directionally Solidified Co-Al-W Superalloys," Rare Metals and Cemented Carbides, no. 1, pp. 21-26, 2018. keywords: {superalloy;Co- 9 Al- 9W-0. 1B;directional solidification;preferred orientation;withdrawing rate;microstructure;electron backscatter diffraction}