daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Process for Improvement of Ta Wire Property AITranslate

Zhuzhou Cemented Carbide Factory Tantalum Niobium Division
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

Based on the traditional technology,large improvement is made on the key operations of small-diameter Ta wire,focusing on the elimination of the problems in Ta wire produced by original technology,such as high O_2 content;low tensile strength,poor surface quality,large tolerance,low resistance against partial O_2 brittleness.The new technology has resulted in better integral properties of Ta wire and increase of recovery by 5%.The product is qualified enough for export purpose.

KeyWords AITranslate

small-diameter Ta wire integral properties doped

1李学芳.钽的近几年应用动态[J].钽铌工业进展,2001,72(1):19-19.

2曹寒松.提高细径钽丝抗脆性的研究[J].稀有金属与硬质合金,1998,26(3):16-21. 被引量:1

1万庆峰,王德志,赵兵.掺杂与钽丝毛刺的关系研究[J].稀有金属,2008,32(3):381-386. 被引量:1

2李仲香,包玺芳,张健康.实验设计方法改进钽丝用钽粉的酸洗工艺[J].宁夏工程技术,2010,9(3):238-241. 被引量:1

3陈国庆,张秉刚,庄园,邓冰辉,冯吉才.钽与不锈钢电子束焊接接头组织及性能(英文)[J].稀有金属材料与工程,2013,42(5):914-918. 被引量:10

4包玺芳,解永旭,王晖晖.采用DOE实验设计方法改进电容器级铌粉酸洗工艺[J].粉末冶金技术,2017,35(5):371-377. 被引量:1

5包玺芳,解永旭.改善钽丝直线度的研究[J].粉末冶金技术,2020,38(5):340-343.

1陈国庆,张秉刚,赵宇星,冯吉才.难熔金属与钢异种材料焊接研究现状[J].焊接,2014(7):21-25. 被引量:4

2王亚荣,张勇智,余洋,许超.镀层金属对钒合金与不锈钢电子束焊接头组织与性能的影响[J].稀有金属材料与工程,2015,44(4):875-880. 被引量:3

3赵连风,易丹青,刘欢,王琪,王斌.M42高速钢/X32弹簧钢电子束焊接温度场的数值模拟与实验研究[J].粉末冶金材料科学与工程,2015,20(4):513-521. 被引量:3

4张洪刚,雒国清.大球磨机在高压钽锭上的应用[J].世界有色金属,2016,0(9):141-141.

5杨全虎,翟秋亚,徐锦锋,纪腾飞,叶建林.Ta1与0Cr18Ni9薄板的储能焊试验[J].焊接学报,2019,40(9):116-121. 被引量:3

6陈燕飞,赖华生,朱政强,文小强,袁德林,王玉香.钨极氩弧搭接焊钽片接头的显微组织[J].机械工程材料,2020,44(9):31-35.

7翟秋亚,刘帅宾,杨全虎,叶建林,徐锦锋.Ta1/0Cr18Ni9薄板储能焊熔核高熵化机理[J].焊接学报,2020,41(8):79-84. 被引量:3

8翟秋亚,刘帅宾,杨全虎,叶建林,徐锦锋.Ta1/Ta8Ni30Cr20Cu42/0Cr18Ni9储能焊接头组织与性能[J].焊接学报,2020,41(10):60-64. 被引量:3

9陈燕飞,张金祥,周吉学,朱政强.钽的焊接技术研究进展[J].电焊机,2021,51(1):37-41. 被引量:1

10刘泽程,王国伟,肖祥友,刘锋.选择性激光熔化镍基高温合金的工艺优化[J].粉末冶金技术,2021,39(1):81-88. 被引量:2

1詹艳然,吴建国.细径钽丝轧制过程的数值模拟[J].塑性工程学报,2005(z1):168-171.

2万庆峰,田苗,陈林,赵兵,马跃忠.掺杂元素Ge和Ce及掺杂量对钽丝组织和性能的影响[J].材料热处理学报,2013,34(9):127-131. 被引量:2

3曹寒松.提高细径钽丝抗脆性的研究[J].稀有金属与硬质合金,1998,26(3):16-21. 被引量:1

4静恩志,杨义纲.液锌抗氧素在热镀锌锅上的应用[J].金属制品,2005,31(2):32-32.

5周龙江,张亚明.铝,硅共渗提高γ/γ′—α—Mo定向共晶合金抗氧…[J].中国腐蚀与防护学报,1997,17(A05):475-479.

6吴明,陈丽.等离子喷涂热障涂层抗氧化性能研究[J].石油化工高等学校学报,2004,17(4):69-71. 被引量:2

7张澜庭,吴建生,邱国华.Ti_3Al基合金高温氧化行为的原位X射线衍射研究[J].稀有金属材料与工程,1997,26(2):23-26. 被引量:6

8YKM电火花加工液[J].合成润滑材料,2005,32(1):21-21.

9陆峰,李洪建,郭睿,唐力.一种新型缓蚀剂对A3钢的缓蚀性能研究[J].重庆科技学院学报:自然科学版,2010,12(3):110-112. 被引量:5

10成崇远,李子存,宋世远,张杰,蒲改霞,杨靖,张晶.精密钢管拉拔油的研制[J].润滑与密封,2003,28(3):78-78.

Basic Information:

DOI:

Chinese Library Classification Number:TG146.416[金属学及工艺—金属材料]

Citation Information:

Based on the traditional technology,large improvement is made on the key operations of small-diameter Ta wire,focusing on the elimination of the problems in Ta wire produced by original technology,such as high O_2 content;low tensile strength,poor surface quality,large tolerance,low resistance against partial O_2 brittleness.The new technology has resulted in better integral properties of Ta wire and increase of recovery by 5%.The product is qualified enough for export purpose.

quote

GB/T 7714-2015 [1] CAO Han-song. Process for Improvement of Ta Wire Property[J]. Rare Metals and Cemented Carbides, 2002(2): 28-32.
MLA [1] CAO Han-song. "Process for Improvement of Ta Wire Property." Rare Metals and Cemented Carbides, no. 2, 2002, pp. 28-32.
APA [1] CAO Han-song. (2002). Process for Improvement of Ta Wire Property. Rare Metals and Cemented Carbides(2), 28-32.
IEEE [1] CAO Han-song, "Process for Improvement of Ta Wire Property," Rare Metals and Cemented Carbides, no. 2, pp. 28-32, 2002. keywords: {small-diameter Ta wire;integral properties;doped}