Research on Tool Wear in EHM Cutting of Inconel 718 Based on DEFORM-3D AITranslate
Abstract AITranslate
Superalloy with difficult machining problem is the key material for engines. In order to reduce the tool wear depth in the machining area,the EHM simulation model of the superalloy Inconel 718 is estab lished by DEFORM-3D software. Then the simulation experiments of single factor experiments and or thogonal experiments are carried out with the EHM simulation model. The experimental results show that with the continuous increase of cutting speed, cutting depth and feed rate, the tool wear depth shows a steadily upward tendency,and the increase of the initial temperature of the workpiece continuously reduces the tool wear depth. Under the condition that the initial temperature of the workpiece keeps rising, the wear depth of the EHM simulation model tool is reduced by 21.9% compared with that of non-current heating cutting tool.
KeyWords AITranslate
1丁黎光.加热切削技术及其发展和应用[J].航空制造技术,2002,0(9):44-46. 被引量：6
2向彪,董霖,康裕华.GCr15钢导电加热硬切削性能有限元仿真[J].润滑与密封,2017,42(8):82-86. 被引量：2
3陈燕,杨树宝,傅玉灿,徐九华,苏宏华.钛合金TC4高速切削刀具磨损的有限元仿真[J].航空学报,2013,34(9):2230-2240. 被引量：40
4谢林春,鄢锉,刘为桥,余国栋.激光辅助加热切削氧化铝工程陶瓷的刀具磨损试验研究[J].现代制造工程,2015(3):95-99. 被引量：3
5王明强,朱永梅,刘文欣.有限元网格划分方法应用研究[J].机械设计与制造,2004(1):22-24. 被引量：136
6尹曰建,段涛,张雁鹏.基于极差分析法对柴油机喷嘴参数进行优化设计[J].内燃机与配件,2017,0(7):12-14. 被引量：4
1于晓琳,吕诚凯,黄树涛,许立福,张玉璞,赵萍.铣削高强度钢刀具磨损有限元仿真研究[J].工具技术,2022,56(1):9-14. 被引量：3
2张雁,李庆华,杨凤双.微织构刀具连续磨损建模与仿真研究[J].工具技术,2022,56(9):76-81.
1蔡汉越,陈永鹏,刘鸿梁,李钢.车齿刀前刀面几何构型对切削力和切削温度的影响[J].工具技术,2023,57(5):92-96.
2谢莫颖.涂层硬质合金高速铣削U71Mn钢材的磨损性能研究[J].硬质合金,2023,40(3):193-199.
3张春霖,周婷婷,胡天亮,肖光春,陈照强.刀具切削变工况数字孪生模型构建方法[J].计算机集成制造系统,2023,29(6):1852-1866.
1来水利,关悦,张昭,袁恒超,袁启明.微波辐射下P(BMA/2-EHM/St)复合凹凸棒高吸油树脂的制备[J].精细化工,2018,35(6):910-917. 被引量：1
2王偉生,肖金彪.航空发动机健康管理系统及其标准分析[J].航空动力,2019,0(1):68-70. 被引量：4
3冷护基,颜文祺.SLP和遗传算法相结合的车间布局研究[J].价值工程,2019,38(16):63-66. 被引量：5
4张威,潘杨,韩锐,刘其鹏,高月华.搅拌摩擦焊接过程搅拌头几何对搅拌头受力的影响[J].应用物理,2019,9(4):169-176. 被引量：3
5赵帅,孙友宏,刘世畅,李强.高压工频热解扶余油页岩的温度场模拟[J].东北大学学报：自然科学版,2019,40(3):414-419. 被引量：3
6程少博,于建民,张治民,王梦洁,刘涛.响应面法优化镁合金杯形件旋转挤压参数的研究[J].热加工工艺,2019,48(7):136-141. 被引量：1
7王勇勤,赵兵,罗远新.直齿圆柱齿轮轴向温轧有限元模拟与试验研究[J].重型机械,2019,0(3):29-33.
8石磊,柳翊,沈俊芳,金文中,王黎,张伟.P-ECAP挤压镁合金空心壁板的晶粒度演变模拟和实验研究[J].材料导报,2019,33(12):2019-2024. 被引量：1
9朱培培,王宝涛,陈金花,董太宁.提升汽轮机转子8.4mm T型槽加工效率[J].工具技术,2019,53(6):68-70.
10姜俊伯,吴锐.对钛合金零件加工工艺方法的探讨[J].内燃机与配件,2019(11):97-98. 被引量：1
Basic Information:
DOI：
Chinese Library Classification Number:TG71[金属学及工艺—刀具与模具]
Citation Information:
Superalloy with difficult machining problem is the key material for engines. In order to reduce the tool wear depth in the machining area,the EHM simulation model of the superalloy Inconel 718 is estab lished by DEFORM-3D software. Then the simulation experiments of single factor experiments and or thogonal experiments are carried out with the EHM simulation model. The experimental results show that with the continuous increase of cutting speed, cutting depth and feed rate, the tool wear depth shows a steadily upward tendency,and the increase of the initial temperature of the workpiece continuously reduces the tool wear depth. Under the condition that the initial temperature of the workpiece keeps rising, the wear depth of the EHM simulation model tool is reduced by 21.9% compared with that of non-current heating cutting tool.
quote
| GB/T 7714-2015 | [1] TENG Wen-bo, PAN Xing-yu, KANG Yu-hua, et al. Research on Tool Wear in EHM Cutting of Inconel 718 Based on DEFORM-3D[J]. Rare Metals and Cemented Carbides, 2019(3): 51-55. |
| MLA | [1] TENG Wen-bo, et al., "Research on Tool Wear in EHM Cutting of Inconel 718 Based on DEFORM-3D." Rare Metals and Cemented Carbides, no. 3, 2019, pp. 51-55. |
| APA | [1] TENG Wen-bo, PAN Xing-yu, KANG Yu-hua, & DONG Lin. (2019). Research on Tool Wear in EHM Cutting of Inconel 718 Based on DEFORM-3D. Rare Metals and Cemented Carbides(3), 51-55. |
| IEEE | [1] TENG Wen-bo, PAN Xing-yu, KANG Yu-hua, and DONG Lin, "Research on Tool Wear in EHM Cutting of Inconel 718 Based on DEFORM-3D," Rare Metals and Cemented Carbides, no. 3, pp. 51-55, 2019. keywords: {cutting machining;Inconel 718;EHM;simulation model;DEFORM-3D software;tool wear} |