Improved Power Factor in Highly Textured n-Type Ag2Se Flexible Films Improved Power Factor in Highly Textured n-Type Ag2Se Flexible Films AITranslate
Abstract AITranslate
Flexible thin films of mixed ion–electron conductor Ag2Se are an attractive candidate for wearable thermoelectric applications near room temperature. In this work, deposition of Se/Ag2Se1−δ bi-layers by simple thermal evaporation followed by annealing enhances the Se content in the Ag2Se1−δ films. The Se enrichment of the Ag2Se1−δ films resulted in the improvement of the power factor through improved texturing and an enhanced Seebeck coefficient due to reduced carrier concentration. Films with Se/Ag ratio of ∼0.5 showed the highest power factor of ∼22 μW cm–1 K–2 at 320 K, i.e., 85% higher than that of films with Se/Ag ratio of 0.33. These high-performance films exhibited a very mild reversible change in the Seebeck coefficient and resistance on convex bending. A thermoelectric generator with 10 uni-legs of optimized films showed an outstanding power density of 2.6 W m–2 at a temperature difference of 10 K.
KeyWords AITranslate
Basic Information:
DOI:https://doi.org/10.1021/acsaelm.2c01709
Chinese Library Classification Number:
Citation Information:
Flexible thin films of mixed ion–electron conductor Ag2Se are an attractive candidate for wearable thermoelectric applications near room temperature. In this work, deposition of Se/Ag2Se1−δ bi-layers by simple thermal evaporation followed by annealing enhances the Se content in the Ag2Se1−δ films. The Se enrichment of the Ag2Se1−δ films resulted in the improvement of the power factor through improved texturing and an enhanced Seebeck coefficient due to reduced carrier concentration. Films with Se/Ag ratio of ∼0.5 showed the highest power factor of ∼22 μW cm–1 K–2 at 320 K, i.e., 85% higher than that of films with Se/Ag ratio of 0.33. These high-performance films exhibited a very mild reversible change in the Seebeck coefficient and resistance on convex bending. A thermoelectric generator with 10 uni-legs of optimized films showed an outstanding power density of 2.6 W m–2 at a temperature difference of 10 K.
quote
| GB/T 7714-2015 | [1] Pritam Sarkar, Soumen Samanta, Debarati Das, et al. ACS Applied Electronic Materials, 2023(5). DOI:10.1021/acsaelm.2c01709. |
| MLA | [1] Pritam Sarkar, et al., ACS Applied Electronic Materials, no. 5, 2023, https://doi.org/10.1021/acsaelm.2c01709. |
| APA | [1] Pritam Sarkar, Soumen Samanta, Debarati Das, Ankita Pathak, Veerender Putta, Pankaj K. Patro, Soumyabrata Patra, Anil Krishna Debnath, Shovit Bhattacharya, Kunal Purnachandra Muthe, & Ajay Singh. (2023). ACS Applied Electronic Materials(5). https://doi.org/10.1021/acsaelm.2c01709 |
| IEEE | [1] Pritam Sarkar, Soumen Samanta, Debarati Das, Ankita Pathak, Veerender Putta, Pankaj K. Patro, Soumyabrata Patra, Anil Krishna Debnath, Shovit Bhattacharya, Kunal Purnachandra Muthe, and Ajay Singh, ACS Applied Electronic Materials, no. 5, 2023, doi: 10.1021/acsaelm.2c01709. keywords: {thermoelectrics flexible films ion−electron conductor vacancies Xray photoelectron spectroscopy} |
