Study on Preparation of Be-Ti Alloys and their Microstructure and Properties AITranslate
Abstract AITranslate
Be-16%Ti,Be-24%Ti and Be-30.8%Ti alloys were prepared by arc melting and suction casting.The phase composition,microstructure and microhardness of the alloys were analyzed.The results show that Be-16%Ti and Be-24%Ti alloys are composed of Be phase and Be12Ti phase,and Be-30.8%Ti alloy contains Be12Ti phase in addition to Be phase and Be12Ti phase.With the increase of solidification rate du-ring suction casting,the grain size of Be-30.8%Ti alloy casting gradually decreases.The primary dendrite spacing ofφ8 mm Be-30.8%Ti alloy casting is up to 40μm,while the primary dendrite spacing ofφ4 mm casting is about 10μm.With the increase of Ti content,the hardness of Be-Ti alloys obviously increases,and the microhardness of Be-30.8%Ti alloy can reach 950 HV.
KeyWords AITranslate
1丛伟.模数法在铸钢件冒口设计中的应用[J].沈阳航空工业学院学报,2002,19(4):17-19. 被引量：7
1张福荣,韩明,王善瑞,鲁昌凯.Ti合金中亚稳过渡相与基体之间的位向关系[J].河北工业大学学报,2022,51(2):40-46.
2郭学益,董朝望,夏阳,刘沛东,刘汉宁,田庆华.氧化物直接还原制备低氧Ti-48Al-2Cr-2Nb合金粉末[J].中国有色金属学报：英文版,2022,32(4):1351-1361. 被引量：2
3岳帅帅,叶子天,郭扬帆,唐云宇,张小丽.定向凝固过程中单晶合金枝晶生长的研究进展[J].材料研究与应用,2022,16(2):328-336. 被引量：1
4王建武,王宁,杨树峰.基于数值模拟的镍基高温合金电渣重熔工艺优化[J].中国冶金,2022,32(3):80-86. 被引量：3
5孙志标,宋帮鹍,耿耀,崇洋.CU5MCuC镍基合金止回阀体铸造工艺的探讨[J].铸造工程,2022,46(3):1-5.
6吴元浩,李玥,金雪花,徐婧婷,郭顺堂.高浓度煮浆对豆腐品质提升的作用及其机制[J].食品科学,2022,43(7):61-66. 被引量：4
7赵刘强,邓安强,杨洋,康晓燕,罗永春.La-Nd-Y-Ni系A_(5)B_(19)型退火合金的相结构及储氢与电化学性能研究[J].中国稀土学报,2022,40(2):250-260. 被引量：3
8艾诚,王国鑫,郭敏,孙志平,张凤英,刘林.沉淀强化钴基单晶高温合金凝固行为的研究进展[J].中国有色金属学报,2022,32(3):645-657. 被引量：1
9孙宝德,王俊,康茂东,汪东红,董安平,王飞,高海燕,王国祥,杜大帆.高温合金超限构件精密铸造技术及发展趋势[J].金属学报,2022,58(4):412-427. 被引量：8
Basic Information:
DOI：
Chinese Library Classification Number:TG146.24[金属学及工艺—金属材料]
Citation Information:
Be-16%Ti,Be-24%Ti and Be-30.8%Ti alloys were prepared by arc melting and suction casting.The phase composition,microstructure and microhardness of the alloys were analyzed.The results show that Be-16%Ti and Be-24%Ti alloys are composed of Be phase and Be12Ti phase,and Be-30.8%Ti alloy contains Be12Ti phase in addition to Be phase and Be12Ti phase.With the increase of solidification rate du-ring suction casting,the grain size of Be-30.8%Ti alloy casting gradually decreases.The primary dendrite spacing ofφ8 mm Be-30.8%Ti alloy casting is up to 40μm,while the primary dendrite spacing ofφ4 mm casting is about 10μm.With the increase of Ti content,the hardness of Be-Ti alloys obviously increases,and the microhardness of Be-30.8%Ti alloy can reach 950 HV.
quote
| GB/T 7714-2015 | [1] PENG Shi-xian, WANG Jing, ZHAO Fu-ze, et al. Study on Preparation of Be-Ti Alloys and their Microstructure and Properties[J]. Rare Metals and Cemented Carbides, 2022(2): 70-74. |
| MLA | [1] PENG Shi-xian, et al., "Study on Preparation of Be-Ti Alloys and their Microstructure and Properties." Rare Metals and Cemented Carbides, no. 2, 2022, pp. 70-74. |
| APA | [1] PENG Shi-xian, WANG Jing, ZHAO Fu-ze, & ZHANG Xin-jian. (2022). Study on Preparation of Be-Ti Alloys and their Microstructure and Properties. Rare Metals and Cemented Carbides(2), 70-74. |
| IEEE | [1] PENG Shi-xian, WANG Jing, ZHAO Fu-ze, and ZHANG Xin-jian, "Study on Preparation of Be-Ti Alloys and their Microstructure and Properties," Rare Metals and Cemented Carbides, no. 2, pp. 70-74, 2022. keywords: {Be-Ti alloy;arc melting;suction casting;microstructure;hardness} |