daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Electrochemical Performance of LixSiON Polymer Electrolytes Derived from an Agriculture Waste Product, Rice Hull Ash AITranslate

University of Michigan; University of Michigan; University of Michigan
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

The electrochemical performance of LixSiON (x = 2, 4, and 6) polymer electrolytes derived from the agricultural waste, rice hull ash (RHA, 80–90 wt % SiO2), is reported. Silica can be extracted from RHA by base-catalyzed reaction with hexylene glycol forming the spirosiloxane [(C6H12O2)2Si, SP] that distills from the reaction solution. LixSiON polymer electrolytes form on reacting SP with xLiNH2, offering a low-cost, low-temperature, and green synthesis route. The effect of N and Li+ concentrations in the polymer electrolytes are correlated with ionic and electrical conductivity. X-ray photoelectron spectroscopy studies confirm that N and Li contents increase with increasing LiNH2 content. The amorphous nature and high Li+ contents of the Li6SiON electrolyte provide an optimal ionic conductivity (6.5 × 10–6) at ambient temperature when coated on Celgard. Furthermore, the LixSiON polymer electrolytes offer high Li+ transference numbers (∼0.75–1), enabling assembly of Li symmetric cells with high critical current densities (3.75 mA cm–2). Finally, Li-SPAN (sulfurized, carbonized polyacrylonitrile) half-cells with Li6SiON polymer electrolytes deliver discharge capacities of ∼765 and 725 mAh/g at 0.25 and 0.5 C rates over 50 cycles.

KeyWords AITranslate

LixSiON polymer precursors amorphous electrolytes transference number
No data

Basic Information:

DOI:https://doi.org/10.1021/acsapm.1c00192

Chinese Library Classification Number:

Citation Information:

The electrochemical performance of LixSiON (x = 2, 4, and 6) polymer electrolytes derived from the agricultural waste, rice hull ash (RHA, 80–90 wt % SiO2), is reported. Silica can be extracted from RHA by base-catalyzed reaction with hexylene glycol forming the spirosiloxane [(C6H12O2)2Si, SP] that distills from the reaction solution. LixSiON polymer electrolytes form on reacting SP with xLiNH2, offering a low-cost, low-temperature, and green synthesis route. The effect of N and Li+ concentrations in the polymer electrolytes are correlated with ionic and electrical conductivity. X-ray photoelectron spectroscopy studies confirm that N and Li contents increase with increasing LiNH2 content. The amorphous nature and high Li+ contents of the Li6SiON electrolyte provide an optimal ionic conductivity (6.5 × 10–6) at ambient temperature when coated on Celgard. Furthermore, the LixSiON polymer electrolytes offer high Li+ transference numbers (∼0.75–1), enabling assembly of Li symmetric cells with high critical current densities (3.75 mA cm–2). Finally, Li-SPAN (sulfurized, carbonized polyacrylonitrile) half-cells with Li6SiON polymer electrolytes deliver discharge capacities of ∼765 and 725 mAh/g at 0.25 and 0.5 C rates over 50 cycles.

quote

GB/T 7714-2015 [1] Eleni Temeche, Xinyu Zhang, Richard M. Laine. ACS Applied Polymer Materials, 2021(3). DOI:10.1021/acsapm.1c00192.
MLA [1] Eleni Temeche, et al., ACS Applied Polymer Materials, no. 3, 2021, https://doi.org/10.1021/acsapm.1c00192.
APA [1] Eleni Temeche, Xinyu Zhang, & Richard M. Laine. (2021). ACS Applied Polymer Materials(3). https://doi.org/10.1021/acsapm.1c00192
IEEE [1] Eleni Temeche, Xinyu Zhang, and Richard M. Laine, ACS Applied Polymer Materials, no. 3, 2021, doi: 10.1021/acsapm.1c00192. keywords: {LixSiON;polymer precursors;amorphous electrolytes;transference number}