daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Van der Waals Epitaxy Growth and Characterization of 7:7:8 Commensurate Heterointerfaces between h-AlN and Two-Dimensional WS2/c-Al2O3 Van der Waals Epitaxy Growth and Characterization of 7:7:8 Commensurate Heterointerfaces between h-AlN and Two-Dimensional WS2/c-Al2O3 AITranslate

Taiwan Instrument Research Institute; National Taipei University of Technology;Taiwan Instrument Research Institute;Taiwan Instrument Research Institute; National Yang Ming Chiao Tung University;Taiwan Instrument Research Institute;Taiwan Instrument Research Institute;Taiwan Instrument Research Institute; National Taipei University of Technology;Taiwan Instrument Research Institute;Taiwan Instrument Research Institute
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

In this study, hexagonal AlN (h-AlN) thin films were grown on a two-dimensional (2D)-WS2/Al2O3 substrate by radio frequency–metalorganic molecular beam epitaxy at 800 °C. We examined the influence of various RF plasma powers on the synthesis and characterization of AlN/WS2 heterostructures, as well as their properties, for optoelectronic applications. In-plane grazing incidence X-ray diffraction results indicated that the h-AlN thin films grown on 2D-WS2/Al2O3(0001) are oriented along (100) and (110) planes, indicating epitaxial growth with orientation relationships between AlN(101̅0)//WS2(101̅0)//Al2O3(112̅0) and AlN(112̅0)//WS2(112̅0)//Al2O3(112̅0). The full width at half-maximum values of the AlN thin film at 300 W of RF power were measured to be 260 and 1400 arcsec for (0002) and (101̅0) reflections, respectively. Transmission electron microscopy images show that the AlN (0002) films can grow epitaxially with the WS2/Al2O3 substrate and that the film structure is nearly stoichiometric in composition. In addition, the AlN film was measured to be approximately 50 nm thick. The AlN surface corresponds to the (0002) plane of AlN, and a direct measurement based on the lattice image yielded a lattice parameter of c = 4.98 Å. Additionally, the high-resolution cross-sectional transmission electron microscopy images show that the 50 nm-thick AlN film on WS2 has relaxed lattice parameters and is a layered structure with an in-plane lattice match aligned with the underlying WS2 lattice. This is evidence of domain-matching epitaxy with an atomic ratio of 7:7:8, demonstrating a commensurate match among AlN, WS2, and Al2O3. These results will have a significant impact on the heteroepitaxy of high-quality thin AlN films with a WS2 buffer and will facilitate the preparation of nitride-based optoelectronic devices at low growth temperatures.

KeyWords AITranslate

AlN WS2 van der Waals epitaxy domainmatching epitaxy Inplane XRD
No data

Basic Information:

DOI:https://doi.org/10.1021/acsaelm.3c01218

Chinese Library Classification Number:

Citation Information:

In this study, hexagonal AlN (h-AlN) thin films were grown on a two-dimensional (2D)-WS2/Al2O3 substrate by radio frequency–metalorganic molecular beam epitaxy at 800 °C. We examined the influence of various RF plasma powers on the synthesis and characterization of AlN/WS2 heterostructures, as well as their properties, for optoelectronic applications. In-plane grazing incidence X-ray diffraction results indicated that the h-AlN thin films grown on 2D-WS2/Al2O3(0001) are oriented along (100) and (110) planes, indicating epitaxial growth with orientation relationships between AlN(101̅0)//WS2(101̅0)//Al2O3(112̅0) and AlN(112̅0)//WS2(112̅0)//Al2O3(112̅0). The full width at half-maximum values of the AlN thin film at 300 W of RF power were measured to be 260 and 1400 arcsec for (0002) and (101̅0) reflections, respectively. Transmission electron microscopy images show that the AlN (0002) films can grow epitaxially with the WS2/Al2O3 substrate and that the film structure is nearly stoichiometric in composition. In addition, the AlN film was measured to be approximately 50 nm thick. The AlN surface corresponds to the (0002) plane of AlN, and a direct measurement based on the lattice image yielded a lattice parameter of c = 4.98 Å. Additionally, the high-resolution cross-sectional transmission electron microscopy images show that the 50 nm-thick AlN film on WS2 has relaxed lattice parameters and is a layered structure with an in-plane lattice match aligned with the underlying WS2 lattice. This is evidence of domain-matching epitaxy with an atomic ratio of 7:7:8, demonstrating a commensurate match among AlN, WS2, and Al2O3. These results will have a significant impact on the heteroepitaxy of high-quality thin AlN films with a WS2 buffer and will facilitate the preparation of nitride-based optoelectronic devices at low growth temperatures.

quote

GB/T 7714-2015 [1] WeiChun Chen, MuHuan Lee, KunAn Chiu, et al. ACS Applied Electronic Materials, 2024(6). DOI:10.1021/acsaelm.3c01218.
MLA [1] WeiChun Chen, et al., ACS Applied Electronic Materials, no. 6, 2024, https://doi.org/10.1021/acsaelm.3c01218.
APA [1] WeiChun Chen, MuHuan Lee, KunAn Chiu, WeiLin Wang, YenTeng Ho, YuWei Lin, CheChin Chen, HungPin Chen, ShihFeng Tseng, HuaLin Chen, & FongZhi Chen. (2024). ACS Applied Electronic Materials(6). https://doi.org/10.1021/acsaelm.3c01218
IEEE [1] WeiChun Chen, MuHuan Lee, KunAn Chiu, WeiLin Wang, YenTeng Ho, YuWei Lin, CheChin Chen, HungPin Chen, ShihFeng Tseng, HuaLin Chen, and FongZhi Chen, ACS Applied Electronic Materials, no. 6, 2024, doi: 10.1021/acsaelm.3c01218. keywords: {AlN WS2 van der Waals epitaxy domainmatching epitaxy Inplane XRD}