Brazing of γ-TiAl Alloy for High Temperature Applications AITranslate
Abstract AITranslate
Description is made of the filler alloys for vacuum brazing of high-temperature r-TiAl alloy.The paper also presents the structure and mechanical properties of various brazed joints.Relative analysis and comparison is also made.
KeyWords AITranslate
1Uenishi K, et al. Joining of intermetallic compound TiAlby using A1 filler metal[J]. Zeitschrift Fuer Metullkunde, 1995, 86(4) :270.
2Blue C A, et al. Microstructural evolution in joing of TiAl with a liquid Ti alloys [ J ]. Scripta Metallurgica et Materialia, 1998,(32) 1 : 127.
3Siren M, et al. Braging of γ-TiAl for high temperature applications [ Z ]. Germany: Intermetallics and Superalloys DGM.2002. 277.
1韩明,康慧,曲平.Ti-15Cu-15Ni真空钎焊TiAl合金[J].航天制造技术,2004(4):22-24. 被引量：9
2静永娟,李晓红,侯金保,岳喜山.Ti_3Al基合金TLP扩散连接界面的组织演变[J].焊接学报,2013,34(2):71-74. 被引量：7
3尚泳来,任海水,熊华平,静永娟,秦仁耀.γ-TiAl合金自身及其与高温合金的钎焊技术研究进展与趋势[J].焊接,2018(12):12-20. 被引量：5
1陈波,熊华平,毛唯,程耀永,叶雷,吴欣.采用Ti-15Cu-15Ni钎料的TiAl/42CrMo钢接头组织及形成机理[J].航空材料学报,2006,26(3):317-318. 被引量：4
2崔治,崔宪普.TiAl合金连接技术的研究进展[J].焊接技术,2013,42(9):6-9. 被引量：1
3张静,路文江,俞伟元,陈学定,魏恒斗.快冷铜基钎料真空钎焊的润湿性研究[J].兰州理工大学学报,2006,32(2):18-20. 被引量：2
4李玉龙,冯吉才,何鹏,曹健.TiAl基合金钎焊技术研究现状及展望[J].焊接,2007(12):13-18. 被引量：4
5朱琦.航空航天焊接专题[J].焊接,2008(11):8-18. 被引量：9
6叶雷,熊华平,陈波,毛唯,程耀永,李晓红.CoFe基和Fe基高温钎料钎焊TiAl合金接头微观组织[J].材料工程,2010,38(10):61-64. 被引量：2
7唐家伟,谢淑兰,赵兴科.Ag-28Cu钎焊TiNiSMA接头的微观组织特征[J].热喷涂技术,2010,2(4):67-72.
8孙进.强势媒体 经营新思路[J].中国记者,2002(1):14-16. 被引量：1
9静永娟,柴禄,高兴强.Ti-22Al-25Nb合金板材的钎焊工艺[J].焊接学报,2015,36(11):89-92.
10任海水,熊华平,陈波,逄淑杰,叶雷.以Ti-Zr-Cu-Ni-Fe合金为中间层的Ti_3Al/TiAl瞬间液相扩散连接[J].焊接学报,2016,37(3):106-110. 被引量：3
1伊藤勋,朱建国.大气中扩散焊接Al—Sn系填充合金的开发[J].有色金属与稀土应用,1995(3):7-12.
2Tony Anderson,张锋.如何避免铝合金的裂纹[J].国外机车车辆工艺,2010(6):29-32.
3杨福宝,刘恩克,徐骏,石力开.Er对Al-Mg-Mn-Zn-Sc-Zr-(Ti)填充合金凝固组织与力学性能的影响[J].金属学报,2008,44(8):911-916. 被引量：19
4杨福宝,刘恩克,徐骏,张志峰,石力开.Sc、Zr和Er微合金化Al-5Mg填充合金的焊接热裂敏感性[J].中国有色金属学报,2010,20(4):620-627. 被引量：16
5何伟锋,孙振忠,陈勇志,陈海彬.泡沫铝芯填充合金的制造工艺技术研究[J].热加工工艺,2011,40(9):68-70.
6Jaeo.,DM,齐凤.一种新型低熔点钎料[J].有色金属与稀土应用,1998(2):15-23.
Basic Information:
DOI：
Chinese Library Classification Number:TG457.19[金属学及工艺—焊接]
Citation Information:
Description is made of the filler alloys for vacuum brazing of high-temperature r-TiAl alloy.The paper also presents the structure and mechanical properties of various brazed joints.Relative analysis and comparison is also made.
quote
| GB/T 7714-2015 | [1] QIN Chuan. Brazing of γ-TiAl Alloy for High Temperature Applications[J]. Rare Metals and Cemented Carbides, 2003(2): 52-54. |
| MLA | [1] QIN Chuan. "Brazing of γ-TiAl Alloy for High Temperature Applications." Rare Metals and Cemented Carbides, no. 2, 2003, pp. 52-54. |
| APA | [1] QIN Chuan. (2003). Brazing of γ-TiAl Alloy for High Temperature Applications. Rare Metals and Cemented Carbides(2), 52-54. |
| IEEE | [1] QIN Chuan, "Brazing of γ-TiAl Alloy for High Temperature Applications," Rare Metals and Cemented Carbides, no. 2, pp. 52-54, 2003. keywords: {γ-TiAl alloy;Brazing;filler alloy} |