daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Effect of Mesogenic Side Groups on the Redox, Photophysical, and Solar Cell Properties of Diketopyrrolopyrrole-trans-bis(diphosphine)diethynylplatinum(II) Polymers AITranslate

Université de Sherbrooke;Normandie Univ.;Normandie Univ.;Normandie Univ.;Normandie Univ.; Université de Sherbrooke;Normandie Univ.;Normandie Univ.; LNM Institute of Information Technology (Deemed to be University); Université de Sherbrooke
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

Three ([Pt]-DPP)n polymers PA, PB, and PC bearing cyanobiphenyl, alkyloxyphenyl, and triphenylene self-assembling groups were synthesized. The optical, electrochemical, photophysical, and solar cell properties were investigated and compared to analogue polymer P1 deprived of any organizing group. Significant differences lie in the more stabilized lowest unoccupied molecular orbital (LUMO) level for PA and the highest occupied molecular orbital (HOMO) level for PC. X-ray diffraction analyses on thin films evidenced π-aggregation of molecules for PA and PB. Nanosecond timescale fluorescent lifetimes were measured for PA, PB, and PC. An ultrafast photoinduced electron transfer between these polymers and phenyl-C61-butyric acid methyl ester (PC61BM) was brought out from femtosecond transient absorption spectroscopy (fs-TAS). It is faster for PC than for PA and PB. The recombination leads to singlet- and triplet-state formation (([Pt]-DPP)n)•+ + PC61BM•– → 3([Pt]-DPP)n* + ([Pt]-DPP)n + PC61BM. Solar cells were fabricated using polymers blended with an acceptor (PC71BM or IT-4F) as an active layer in conventional device structure indium tin oxide (ITO)/poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS)/active layer/poly[(9,9-dioctyl-2,7-fluorene)-alt-(9,9-bis(3′-(N,N-dimethylamino)propyl)-2,7-fluorene)] (PFN)/Al. Unlike PA, polymers PB and PC exhibit better photovoltaic performances than P1. Higher power conversion efficiencies (PCEs) were reached with IT-4F, PB:IT-4F (PCE = 10.83%, Jsc = 17.83 mA cm–2, Voc = 0.98 V), and PC:IT-4F (PCE = 13.26%, Jsc = 18.95 mA cm–2, Voc = 1.06 V). This work highlights the beneficial impact of triphenylene self-assembling groups on photovoltaic properties. PC exhibits a record-high PCE (13.26%) for [Pt]-containing polyyne oligomers and small molecules.

KeyWords AITranslate

selfassembling mesogenic metallooligomers diketopyrrolopyrrole photophysical solar cell
No data

Basic Information:

DOI:https://doi.org/10.1021/acsapm.0c01325

Chinese Library Classification Number:

Citation Information:

Three ([Pt]-DPP)n polymers PA, PB, and PC bearing cyanobiphenyl, alkyloxyphenyl, and triphenylene self-assembling groups were synthesized. The optical, electrochemical, photophysical, and solar cell properties were investigated and compared to analogue polymer P1 deprived of any organizing group. Significant differences lie in the more stabilized lowest unoccupied molecular orbital (LUMO) level for PA and the highest occupied molecular orbital (HOMO) level for PC. X-ray diffraction analyses on thin films evidenced π-aggregation of molecules for PA and PB. Nanosecond timescale fluorescent lifetimes were measured for PA, PB, and PC. An ultrafast photoinduced electron transfer between these polymers and phenyl-C61-butyric acid methyl ester (PC61BM) was brought out from femtosecond transient absorption spectroscopy (fs-TAS). It is faster for PC than for PA and PB. The recombination leads to singlet- and triplet-state formation (([Pt]-DPP)n)•+ + PC61BM•– → 3([Pt]-DPP)n* + ([Pt]-DPP)n + PC61BM. Solar cells were fabricated using polymers blended with an acceptor (PC71BM or IT-4F) as an active layer in conventional device structure indium tin oxide (ITO)/poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS)/active layer/poly[(9,9-dioctyl-2,7-fluorene)-alt-(9,9-bis(3′-(N,N-dimethylamino)propyl)-2,7-fluorene)] (PFN)/Al. Unlike PA, polymers PB and PC exhibit better photovoltaic performances than P1. Higher power conversion efficiencies (PCEs) were reached with IT-4F, PB:IT-4F (PCE = 10.83%, Jsc = 17.83 mA cm–2, Voc = 0.98 V), and PC:IT-4F (PCE = 13.26%, Jsc = 18.95 mA cm–2, Voc = 1.06 V). This work highlights the beneficial impact of triphenylene self-assembling groups on photovoltaic properties. PC exhibits a record-high PCE (13.26%) for [Pt]-containing polyyne oligomers and small molecules.

quote

GB/T 7714-2015 [1] Gabriel MarineauPlante, Mélodie Nos, Di Gao, et al. ACS Applied Polymer Materials, 2021(3). DOI:10.1021/acsapm.0c01325.
MLA [1] Gabriel MarineauPlante, et al., ACS Applied Polymer Materials, no. 3, 2021, https://doi.org/10.1021/acsapm.0c01325.
APA [1] Gabriel MarineauPlante, Mélodie Nos, Di Gao, Muriel Durandetti, Julie Hardouin, PaulLudovic Karsenti, Cyprien Lemouchi, Loïc Le Pluart, Ganesh D. Sharma, & Pierre D. Harvey. (2021). ACS Applied Polymer Materials(3). https://doi.org/10.1021/acsapm.0c01325
IEEE [1] Gabriel MarineauPlante, Mélodie Nos, Di Gao, Muriel Durandetti, Julie Hardouin, PaulLudovic Karsenti, Cyprien Lemouchi, Loïc Le Pluart, Ganesh D. Sharma, and Pierre D. Harvey, ACS Applied Polymer Materials, no. 3, 2021, doi: 10.1021/acsapm.0c01325. keywords: {selfassembling;mesogenic;metallooligomers;diketopyrrolopyrrole;photophysical;solar cell}