daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper
中
Home > Journals > ACS Applied Polymer Materials
‹ Previous Article Next Article ›

Effects of Standing Waves on the Growth and Stability of Vapor Deposited Polymer Films AITranslate

Prathamesh Karandikar; Mark M. De Luna; Malancha Gupta;
University of Southern California; University of Southern California; University of Southern California
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

We demonstrate that liquid substrates can be agitated in situ via sound during vapor phase polymerization. The effects of standing waves on the growth of polymer films at the vapor–liquid interface were studied by depositing poly(1H,1H,2H,2H-perfluorodecyl acrylate) and poly(1H,1H,2H,2H-perfluorodecyl acrylate-co-ethylene glycol diacrylate) onto an agitated silicone oil lens. It was found that continuous polymer films could be formed by the addition of a cross-linker. We also tested the mechanical stability of the polymer films on agitated liquids and found that the robustness of the films increased with the addition of cross-linker and increasing film thickness.

KeyWords AITranslate

chemical vapor deposition polymer thin films fluoropolymers crosslinking standing waves
No data

Basic Information:

DOI：https://doi.org/10.1021/acsapm.9b00256

Chinese Library Classification Number:

Citation Information:

We demonstrate that liquid substrates can be agitated in situ via sound during vapor phase polymerization. The effects of standing waves on the growth of polymer films at the vapor–liquid interface were studied by depositing poly(1H,1H,2H,2H-perfluorodecyl acrylate) and poly(1H,1H,2H,2H-perfluorodecyl acrylate-co-ethylene glycol diacrylate) onto an agitated silicone oil lens. It was found that continuous polymer films could be formed by the addition of a cross-linker. We also tested the mechanical stability of the polymer films on agitated liquids and found that the robustness of the films increased with the addition of cross-linker and increasing film thickness.

quote

GB/T 7714-2015 [1] Prathamesh Karandikar, Mark M. De Luna, Malancha Gupta. ACS Applied Polymer Materials, 2019(1). DOI:10.1021/acsapm.9b00256.
MLA [1] Prathamesh Karandikar, et al., ACS Applied Polymer Materials, no. 1, 2019, https://doi.org/10.1021/acsapm.9b00256.
APA [1] Prathamesh Karandikar, Mark M. De Luna, & Malancha Gupta. (2019). ACS Applied Polymer Materials(1). https://doi.org/10.1021/acsapm.9b00256
IEEE [1] Prathamesh Karandikar, Mark M. De Luna, and Malancha Gupta, ACS Applied Polymer Materials, no. 1, 2019, doi: 10.1021/acsapm.9b00256. keywords: {chemical vapor deposition;polymer thin films;fluoropolymers;crosslinking;standing waves}