daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Chiral Nematic Solvent-Responsive Actuator Based on a Cellulose Nanocrystal Template AITranslate

Jiangnan University; Jiangnan University; Jiangnan University; Jiangnan University; Jiangnan University; Jiangnan University
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

Photonic actuators have attracted much attention because their periodic photonic crystal structures can produce dual responses of color and motion under stimulus responses. However, photonic actuators face some problems in their manufacture, such as their fragility, high cost, and narrow tunable optical range. It is challenging to use low-cost and simple methods to fabricate a flexible, wide-range response and multicolor photonic actuators. Two cellulose nanocrystals (CNCs) are made by sulfuric acid hydrolysis of microcrystalline cellulose or pulp, which emerged blue and red following evaporative assembly, respectively, and their compositions are adjusted to modify the optical color of the final photonic thin films. The introduction of graphene oxide (GO) and the sacrifice of the CNC template result in a mesoporous structure that provides a conduit for polar liquids. When the film absorbs water, the film expands to increase the layer spacing of the film. Due to the asymmetric structure of the film, the film has different expansion rates, which makes a red shift in the color and directional bending. The film changes color from green to red in 25 s when immersed in water and 20 min in dimethyl sulfoxide (DMSO), but no color change occurs in other solutions with less polarity even after 3 months of soaking. Furthermore, the reaction rate of the film in DMSO depends on the temperature. The film changes color from blue to red in DMSO at 30 °C in 10 min but just 3 min at 70 °C, demonstrating that increasing the temperature speeds up the passage of polar solvent molecules and increases the response rate of the film. The application prospects for the prepared nanocomposite films with changing structural colors and solvent-responsive drivability are favorable in optical actuators, solvent viewers, and other applications.

KeyWords AITranslate

chiral nematic graphene oxide solvents response directional bending cellulose nanocrystals
No data

Basic Information:

DOI:https://doi.org/10.1021/acsapm.2c01338

Chinese Library Classification Number:

Citation Information:

Photonic actuators have attracted much attention because their periodic photonic crystal structures can produce dual responses of color and motion under stimulus responses. However, photonic actuators face some problems in their manufacture, such as their fragility, high cost, and narrow tunable optical range. It is challenging to use low-cost and simple methods to fabricate a flexible, wide-range response and multicolor photonic actuators. Two cellulose nanocrystals (CNCs) are made by sulfuric acid hydrolysis of microcrystalline cellulose or pulp, which emerged blue and red following evaporative assembly, respectively, and their compositions are adjusted to modify the optical color of the final photonic thin films. The introduction of graphene oxide (GO) and the sacrifice of the CNC template result in a mesoporous structure that provides a conduit for polar liquids. When the film absorbs water, the film expands to increase the layer spacing of the film. Due to the asymmetric structure of the film, the film has different expansion rates, which makes a red shift in the color and directional bending. The film changes color from green to red in 25 s when immersed in water and 20 min in dimethyl sulfoxide (DMSO), but no color change occurs in other solutions with less polarity even after 3 months of soaking. Furthermore, the reaction rate of the film in DMSO depends on the temperature. The film changes color from blue to red in DMSO at 30 °C in 10 min but just 3 min at 70 °C, demonstrating that increasing the temperature speeds up the passage of polar solvent molecules and increases the response rate of the film. The application prospects for the prepared nanocomposite films with changing structural colors and solvent-responsive drivability are favorable in optical actuators, solvent viewers, and other applications.

quote

GB/T 7714-2015 [1] Juanjuan Sun, Jiayin Liu, Weidong Yu, et al. ACS Applied Polymer Materials, 2022(4). DOI:10.1021/acsapm.2c01338.
MLA [1] Juanjuan Sun, et al., ACS Applied Polymer Materials, no. 4, 2022, https://doi.org/10.1021/acsapm.2c01338.
APA [1] Juanjuan Sun, Jiayin Liu, Weidong Yu, Jialing Tan, Yunjie Yin, & Chaoxia Wang. (2022). ACS Applied Polymer Materials(4). https://doi.org/10.1021/acsapm.2c01338
IEEE [1] Juanjuan Sun, Jiayin Liu, Weidong Yu, Jialing Tan, Yunjie Yin, and Chaoxia Wang, ACS Applied Polymer Materials, no. 4, 2022, doi: 10.1021/acsapm.2c01338. keywords: {chiral nematic;graphene oxide;solvents response;directional bending;cellulose nanocrystals}