daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Highly Crystalline, Free-Standing Covalent Organic Framework Films Produced Directly from Monomer Solutions AITranslate

DEVCOM Army Research Laboratory;DEVCOM Army Research Laboratory;DEVCOM Army Research Laboratory
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

Films made from covalent organic frameworks (COFs) are promising materials for a variety of applications, such as membranes for chemical separation, mechanically robust engineering materials, and components of energy storage devices. However, current techniques for synthesizing imine-based COF films use methods that are difficult to scale, produce films of only nanometer-scale thickness, or yield films with modest surface areas and low crystallinity. Here, a facile, scalable process for casting free-standing, imine-based COF films tens of microns in thickness directly from a solution of monomers in trifluoroacetic acid and water is reported for the first time. Highly crystalline films with surface areas (2200–2400 m2/g) approaching the theoretical maximum could be achieved by controlling the initial film formation conditions and by heating the produced films in ethanol with a small amount of residual acid.

KeyWords AITranslate

covalent organic framework 2D polymer films controlled evaporation annealing doctor blade
No data

Basic Information:

DOI:https://doi.org/10.1021/acsapm.1c01828

Chinese Library Classification Number:

Citation Information:

Films made from covalent organic frameworks (COFs) are promising materials for a variety of applications, such as membranes for chemical separation, mechanically robust engineering materials, and components of energy storage devices. However, current techniques for synthesizing imine-based COF films use methods that are difficult to scale, produce films of only nanometer-scale thickness, or yield films with modest surface areas and low crystallinity. Here, a facile, scalable process for casting free-standing, imine-based COF films tens of microns in thickness directly from a solution of monomers in trifluoroacetic acid and water is reported for the first time. Highly crystalline films with surface areas (2200–2400 m2/g) approaching the theoretical maximum could be achieved by controlling the initial film formation conditions and by heating the produced films in ethanol with a small amount of residual acid.

quote

GB/T 7714-2015 [1] Morgan G. Barnes, David C. McLeod, Robert H. Lambeth. ACS Applied Polymer Materials, 2022(4). DOI:10.1021/acsapm.1c01828.
MLA [1] Morgan G. Barnes, et al., ACS Applied Polymer Materials, no. 4, 2022, https://doi.org/10.1021/acsapm.1c01828.
APA [1] Morgan G. Barnes, David C. McLeod, & Robert H. Lambeth. (2022). ACS Applied Polymer Materials(4). https://doi.org/10.1021/acsapm.1c01828
IEEE [1] Morgan G. Barnes, David C. McLeod, and Robert H. Lambeth, ACS Applied Polymer Materials, no. 4, 2022, doi: 10.1021/acsapm.1c01828. keywords: {covalent organic framework;2D polymer;films;controlled evaporation;annealing;doctor blade}