Effects of Solvent Polarity on Nanostructure Formation of Spray-Dried TEMPO-Oxidized Cellulose Nanofiber Particles AITranslate
Abstract AITranslate
One of the main challenges in practical applications of nanocellulose-based particles is the maintenance of their high surface area and chemical properties during particle formation in the drying process. In this study, we report the preparation of nanostructured 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO)-oxidized cellulose nanofiber (TOCN) particles via a spray-drying process without changing their chemical functionalization. The physicochemical properties of TOCN particles prepared by various types and concentrations of organic solvents were investigated. The resulting particles possessed a high ζ-potential value (−51 to −63 mV). We found that the formation of the porous structure could be realized by controlling the solvent polarity, which effectively increased the surface area to 222 m2/g and led to a good adsorption capacity for macromolecules such as lysozyme protein (>3200 mg/g). These results show that this method has a wide range of potential applications, e.g., drug delivery agents, adsorbents, encapsulation, and composite technologies.
KeyWords AITranslate
Basic Information:
DOI:https://doi.org/10.1021/acsapm.2c01063
Chinese Library Classification Number:
Citation Information:
One of the main challenges in practical applications of nanocellulose-based particles is the maintenance of their high surface area and chemical properties during particle formation in the drying process. In this study, we report the preparation of nanostructured 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO)-oxidized cellulose nanofiber (TOCN) particles via a spray-drying process without changing their chemical functionalization. The physicochemical properties of TOCN particles prepared by various types and concentrations of organic solvents were investigated. The resulting particles possessed a high ζ-potential value (−51 to −63 mV). We found that the formation of the porous structure could be realized by controlling the solvent polarity, which effectively increased the surface area to 222 m2/g and led to a good adsorption capacity for macromolecules such as lysozyme protein (>3200 mg/g). These results show that this method has a wide range of potential applications, e.g., drug delivery agents, adsorbents, encapsulation, and composite technologies.
quote
| GB/T 7714-2015 | [1] Annie M. Rahmatika, Youhei Toyoda, Tue Tri Nguyen, et al. ACS Applied Polymer Materials, 2022(4). DOI:10.1021/acsapm.2c01063. |
| MLA | [1] Annie M. Rahmatika, et al., ACS Applied Polymer Materials, no. 4, 2022, https://doi.org/10.1021/acsapm.2c01063. |
| APA | [1] Annie M. Rahmatika, Youhei Toyoda, Tue Tri Nguyen, Kiet Le Anh Cao, Tomoyuki Hirano, Takeo Kitamura, Yohsuke Goi, Yuko Morita, & Takashi Ogi. (2022). ACS Applied Polymer Materials(4). https://doi.org/10.1021/acsapm.2c01063 |
| IEEE | [1] Annie M. Rahmatika, Youhei Toyoda, Tue Tri Nguyen, Kiet Le Anh Cao, Tomoyuki Hirano, Takeo Kitamura, Yohsuke Goi, Yuko Morita, and Takashi Ogi, ACS Applied Polymer Materials, no. 4, 2022, doi: 10.1021/acsapm.2c01063. keywords: {TEMPO cellulose nanofibers;nanostructured particle;spray drying;solvent polarity;lysozyme} |
