daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Power Conversion Efficiency Enhancement of Low-Bandgap Mixed Pb–Sn Perovskite Solar Cells by Improved Interfacial Charge Transfer AITranslate

Zhejiang University; Zhejiang University; Zhejiang University; Zhejiang University; Zhejiang University; Zhejiang University; Zhejiang University; Zhejiang University; Zhejiang University; Zhejiang University; Zhejiang University; Zhejiang University
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

The power conversion efficiency (PCE) of low-bandgap mixed Pb–Sn perovskite solar cells (PSCs) has been significantly hindered by large open-circuit voltage (Voc) loss and poor fill factor (FF). Herein, mixed Pb–Sn perovskite films with a composition (FASnI3)0.6(MAPbI3)0.4 were processed with a simple delayed annealing (DA) treatment that enables perovskite films with significantly reduced surface roughness. The treatment reduces nonradiative recombination of interfacial contacts when the perovskite films are interfaced with poly(3,4-ethylenedioxythiphene):poly(styrenesulfonate) (PEDOT:PSS) and fullerene (C60). Charge transfer at the carrier-collection interfaces has been effectively improved, in agreement with time-resolved photoluminescence (TRPL) and transient photovoltage/photocurrent results. Consequently, the champion cell based on perovskite films with DA treatment shows a high Voc of 0.824 V, indicating a greatly suppressed Voc loss (for a bandgap of ∼1.25 eV), and an overall PCE of over 18.6%.

KeyWords AITranslate

No data

Basic Information:

DOI:https://doi.org/10.1021/acsenergylett.9b00880

Chinese Library Classification Number:

Citation Information:

The power conversion efficiency (PCE) of low-bandgap mixed Pb–Sn perovskite solar cells (PSCs) has been significantly hindered by large open-circuit voltage (Voc) loss and poor fill factor (FF). Herein, mixed Pb–Sn perovskite films with a composition (FASnI3)0.6(MAPbI3)0.4 were processed with a simple delayed annealing (DA) treatment that enables perovskite films with significantly reduced surface roughness. The treatment reduces nonradiative recombination of interfacial contacts when the perovskite films are interfaced with poly(3,4-ethylenedioxythiphene):poly(styrenesulfonate) (PEDOT:PSS) and fullerene (C60). Charge transfer at the carrier-collection interfaces has been effectively improved, in agreement with time-resolved photoluminescence (TRPL) and transient photovoltage/photocurrent results. Consequently, the champion cell based on perovskite films with DA treatment shows a high Voc of 0.824 V, indicating a greatly suppressed Voc loss (for a bandgap of ∼1.25 eV), and an overall PCE of over 18.6%.

quote

GB/T 7714-2015 [1] Tingming Jiang, Zeng Chen, Xu Chen, et al. ACS Energy Letters, 2019(4). DOI:10.1021/acsenergylett.9b00880.
MLA [1] Tingming Jiang, et al., ACS Energy Letters, no. 4, 2019, https://doi.org/10.1021/acsenergylett.9b00880.
APA [1] Tingming Jiang, Zeng Chen, Xu Chen, Xinya Chen, Xuehui Xu, Tianyu Liu, Lizhong Bai, Dexin Yang, Dawei Di, Wei E. I. Sha, Haiming Zhu, & Yang Michael Yang. (2019). ACS Energy Letters(4). https://doi.org/10.1021/acsenergylett.9b00880
IEEE [1] Tingming Jiang, Zeng Chen, Xu Chen, Xinya Chen, Xuehui Xu, Tianyu Liu, Lizhong Bai, Dexin Yang, Dawei Di, Wei E. I. Sha, Haiming Zhu, and Yang Michael Yang, ACS Energy Letters, no. 4, 2019, doi: 10.1021/acsenergylett.9b00880.