daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Ni Foam-Supported Fe-Doped β-Ni(OH)2 Nanosheets Show Ultralow Overpotential for Oxygen Evolution Reaction AITranslate

University of California; University of California; University of California; University of California; University of California; Lawrence Berkeley National Laboratory; Lawrence Berkeley National Laboratory; University of California
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

Oxygen evolution reaction (OER) involves multiple electron-transfer processes, resulting in a high activation barrier. Developing catalysts with low overpotential and high intrinsic activity toward OER is critical but challenging. Here we report a major advancement in decreasing the overpotential for oxygen evolution reaction. Ni foam-supported Fe-doped β-Ni(OH)2 nanosheets achieve an overpotential of 219 mV at the geometric current density of 10 mA cm–2. To our knowledge, this is the best value reported for Ni- or Fe hydroxide-based OER catalysts. In addition, the catalyst yields a current density of 6.25 mA cm–2 at the overpotential of 300 mV when it is normalized to the electrochemical surface area of the catalyst. This intrinsic catalytic activity is also better than the values reported for most state-of-the-art OER catalysts at the same overpotential.

KeyWords AITranslate

No data

Basic Information:

DOI:https://doi.org/10.1021/acsenergylett.9b00047

Chinese Library Classification Number:

Citation Information:

Oxygen evolution reaction (OER) involves multiple electron-transfer processes, resulting in a high activation barrier. Developing catalysts with low overpotential and high intrinsic activity toward OER is critical but challenging. Here we report a major advancement in decreasing the overpotential for oxygen evolution reaction. Ni foam-supported Fe-doped β-Ni(OH)2 nanosheets achieve an overpotential of 219 mV at the geometric current density of 10 mA cm–2. To our knowledge, this is the best value reported for Ni- or Fe hydroxide-based OER catalysts. In addition, the catalyst yields a current density of 6.25 mA cm–2 at the overpotential of 300 mV when it is normalized to the electrochemical surface area of the catalyst. This intrinsic catalytic activity is also better than the values reported for most state-of-the-art OER catalysts at the same overpotential.

quote

GB/T 7714-2015 [1] Tianyi Kou, Shanwen Wang, Jesse L. Hauser, et al. ACS Energy Letters, 2019(4). DOI:10.1021/acsenergylett.9b00047.
MLA [1] Tianyi Kou, et al., ACS Energy Letters, no. 4, 2019, https://doi.org/10.1021/acsenergylett.9b00047.
APA [1] Tianyi Kou, Shanwen Wang, Jesse L. Hauser, Mingpeng Chen, Scott R. J. Oliver, Yifan Ye, Jinghua Guo, & Yat Li. (2019). ACS Energy Letters(4). https://doi.org/10.1021/acsenergylett.9b00047
IEEE [1] Tianyi Kou, Shanwen Wang, Jesse L. Hauser, Mingpeng Chen, Scott R. J. Oliver, Yifan Ye, Jinghua Guo, and Yat Li, ACS Energy Letters, no. 4, 2019, doi: 10.1021/acsenergylett.9b00047.