daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Vitrimeric Epoxy-Amine Polyimine Networks Based on a Renewable Vanillin Derivative AITranslate

Department of Analytical and Organic Chemistry, Universitat Rovira i Virgili;Department of Mechanical Engineering, Universitat Rovira i Virgili;Thermodynamics Laboratory ETSEIB;Department of Mechanical Engineering, Universitat Rovira i Virgili;Department of Analytical and Organic Chemistry, Universitat Rovira i Virgili
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

A series of bio-based polyimine vitrimers was obtained and characterized. A diimine-diglycidyl monomer (DIDG) was synthesized by condensing vanillin with 4,4′-oxydianiline (ODA) and further glycidylation with epichlorohydrin. This compound was cross-linked with three different Jeffamines (Jeff230, JeffD400, and JeffT403) with a different number of poly(propylene glycol) units in their structure and different functionalities. Trimethylolpropane triglycidyl ether (TMPTE) was added to the formulation to improve the thermal, mechanical, and thermomechanical properties. All of the materials prepared showed Tg’s above 66 °C, good vitrimeric behavior being the maximum relaxation rate reached by the material prepared from JeffD400, which also allows the most extensive degradation when treated with an acidic aqueous solution. These polyimine vitrimers can entirely relax the stress in less than 10.5 min at 150 °C without any added catalyst. All of the materials prepared could be satisfactorily recycled up to 200 °C also presenting an excellent self-welding ability.

KeyWords AITranslate

vanillin vitrimers imine metathesis covalent adaptable networks recyclability selfwelding
No data

Basic Information:

DOI:https://doi.org/10.1021/acsapm.2c01604

Chinese Library Classification Number:

Citation Information:

A series of bio-based polyimine vitrimers was obtained and characterized. A diimine-diglycidyl monomer (DIDG) was synthesized by condensing vanillin with 4,4′-oxydianiline (ODA) and further glycidylation with epichlorohydrin. This compound was cross-linked with three different Jeffamines (Jeff230, JeffD400, and JeffT403) with a different number of poly(propylene glycol) units in their structure and different functionalities. Trimethylolpropane triglycidyl ether (TMPTE) was added to the formulation to improve the thermal, mechanical, and thermomechanical properties. All of the materials prepared showed Tg’s above 66 °C, good vitrimeric behavior being the maximum relaxation rate reached by the material prepared from JeffD400, which also allows the most extensive degradation when treated with an acidic aqueous solution. These polyimine vitrimers can entirely relax the stress in less than 10.5 min at 150 °C without any added catalyst. All of the materials prepared could be satisfactorily recycled up to 200 °C also presenting an excellent self-welding ability.

quote

GB/T 7714-2015 [1] Adrià Roig, Pere Hidalgo, Xavier Ramis, et al. ACS Applied Polymer Materials, 2022(4). DOI:10.1021/acsapm.2c01604.
MLA [1] Adrià Roig, et al., ACS Applied Polymer Materials, no. 4, 2022, https://doi.org/10.1021/acsapm.2c01604.
APA [1] Adrià Roig, Pere Hidalgo, Xavier Ramis, Silvia De la Flor, & Àngels Serra. (2022). ACS Applied Polymer Materials(4). https://doi.org/10.1021/acsapm.2c01604
IEEE [1] Adrià Roig, Pere Hidalgo, Xavier Ramis, Silvia De la Flor, and Àngels Serra, ACS Applied Polymer Materials, no. 4, 2022, doi: 10.1021/acsapm.2c01604. keywords: {vanillin;vitrimers;imine metathesis;covalent adaptable networks;recyclability;selfwelding}